SIS 76 35 12-1968 Lift cars for passenger lifts and for dual purpose lift in residential buildings《居民楼载客升降机和两用电梯的轿厢》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

MSZ 8512-1964 《燕型径向，吸塑包装制品》.pdf

MSZ 8513-1964 《射线方向的光滑硬金属零件的，圆柱形接入凿孔的铣床刀具头 d1 = 125－250》.pdf

MSZ 8514-1964 《射线方向的光滑硬金属刀头的，弹簧接入钻孔的铣床刀头d1 = 200-400》.pdf

MSZ 8515-1964 《射线方向的，光滑硬金属刀头的，7 24圆锥形主轴头 d1 = 200－400》.pdf

MSZ 8516-1964 《结构紧凑型轴流风机》.pdf

MSZ 8517-1962 《带柄的额头铣床和铣床头部加紧楔形物 射线方向的，为了光滑刀头的固定》.pdf

MSZ 8518-1964 《带柄的额头铣床轴心方向的，光滑硬金属刀头的，6号弹簧的，d1 = 80－160》.pdf

MSZ 8519-1964 《轴心方向的，光滑硬金属刀头的，带弹簧的带柄的额头铣床d1= 80－160》.pdf

MSZ 8520-1964 《燕型轴，纯硬质金属d1 = 80－160，》.pdf