SIS SMS 2771-1970 Hose couplings jor hydraulic hose Straight nipples for mounting in material with 60 interna! cone《液压软管的软管接头 有60内锥的安装材料的直通式接头》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NF T51-110-1975 Wear test by means of friction with plane to plane contact (friction by means of alternating linear sliding) 《用平面与平面摩擦的方法进行磨损试验(交替线性滑动摩擦法)》.pdf

NF T51-113-1976 Plastics Determination of the resistance to scratching 《塑料制品 耐划痕的测定》.pdf

NF T51-114-1979 Plastics Methods for determining mechanical characteristics at temperature specified in a enclosure with regulation of the temperature 《塑料制品 在温度可调的壳体里在特定温度下机械特性的测定方.pdf

NF T51-117-3-1996 Plastics Determination of dynamic mechanical properties Part 3 flexural vibration Resonance-curve method 《塑料制品 动态机械性能的测定 第3部分 挠性振动 共振曲线法》.pdf

NF T51-120-1-1995 Plastics and composites Determination of the bending fatigue properties Part 1 general principles 《塑料制品及复合材料 弯曲疲劳特性的测定 第1部分 一般原则》.pdf

NF T51-120-2-1995 Plastics and composites Determination of the bending fatigue properties Part 2 bending test on test pieces gripped at one end 《塑料制品及复合材料 弯曲疲劳特性的测定 第2部分 固定在一端的试件弯.pdf

NF T51-120-3-1995 Plastics and composites Determination of the bending fatigue properties Part 3 three-point bending test on unsecured test pieces 《塑料制品及复合材料 弯曲疲劳特性的测定 第3部分 不固定试件的.pdf

NF T51-120-4-1995 Plastics and composites Determination of the beding fatigue properties Part 4 four-point bending test on unsecured test pieces 《塑料制品及复合材料 弯曲疲劳特性的测定 第4部分 不固定试件的四点.pdf

NF T51-120-5-1995 Plastics and composites Determination of the bending fatigue properties Part 5 alternating plane-bending test 《塑料制品及复合材料 弯曲疲劳特性测定 第5部分 交替平面弯曲试验》.pdf