SIS SMS 2912-1970 Building-industry fittings Pull and push door handle《建筑业配件 推拉门把手》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM E445 E445M-1988(2013) 6016 Standard Test Method for Stopping Distance on Paved Surfaces Using a Passenger Vehicle Equipped With Full-Scale Tires《装有足尺寸轮胎的乘用车在铺覆路面上刹车距离的标准试验方法》.pdf

ASTM E445 E445M-2015 red 5214 Standard Test Method for Stopping Distance on Paved Surfaces Using a Passenger Vehicle Equipped With Full-Scale Tires《装有足尺寸轮胎的乘用车在铺覆路面上刹车距离的标准试验方法》.pdf

ASTM E446-1998(2004)e1 Standard Reference Radiographs for Steel Castings Up to 2 in [51 mm] in Thickness《钢铸件厚度在2 in(51mm)及以下用基准射线摄影》.pdf

ASTM E446-2010 9375 Standard Reference Radiographs for Steel Castings Up to 2 in (50 8 mm) in Thickness《厚度不超过2英寸(50 8毫米)的钢铸件的标准参考射线照片》.pdf

ASTM E446-2014 red 9684 Standard Reference Radiographs for Steel Castings Up to 2 in &40 50 8 mm&41 in Thickness《厚度在2 in (50 8 mm) 以下钢铸件用标准参考射线底片》.pdf

ASTM E446-2015 red 0967 Standard Reference Radiographs for Steel Castings Up to 2 in (50 8 mm) in Thickness《厚度在2 in (50 8 mm) 以下钢铸件用标准参考射线照片》.pdf

ASTM E448-1982(2002)e1 Standard Practice for Scleroscope Hardness Testing of Metallic Materials《金属材料的回跳硬度试验》.pdf

ASTM E449-1996(2001) Standard Test Methods for Analysis of Calcium Chloride《氯化钙分析的试验方法》.pdf

ASTM E449-2008 752 Standard Test Methods for Analysis of Calcium Chloride《氯化钙分析的标准试验方法》.pdf