SIS SMS-1111-1939 《直阀，调节阀与角内核》.pdf

相关资源

EJ T 20127-2016 离心级联专用电动调节阀规范.pdf

SIS SMS-1114-1939 《调节阀，角阀》.pdf

SIS SMS-1113-1939 《调节阀，直阀》.pdf

气动调节阀的结构和原理.ppt

SIS SMS-1110-1939 《直阀调节阀直袖》.pdf

JB T 7228-1994 风量调节阀.pdf

GB T 10869-2008 电站调节阀.pdf

GB T 4213-2008 气动调节阀.pdf

SIS SMS-1112-1939 《调节阀，角阀，额定压力：10》.pdf

猜你喜欢

FORD WSS-M3B83-A4-2014 PRETREATMENT SOLUTION ALUMINUM SUBSTRATE PASSIVATION TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M3D170-A2-2005 UNSATURATED POLYESTER (UP) 30% GLASS FIBER REINFORCED SHEET MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《30%玻璃纤维增强的不饱和聚酯（UP）片状成型料 与标准FORD WSS-M9.pdf

FORD WSS-M3D173-A4-2004 UNSATURATED POLYESTER (UP) MODIFIED 40% GLASS FIBER REINFORCED SHEET MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《40%玻璃纤维增强的不饱和聚酯(UP)改性片状成型料 与标准.pdf

FORD WSS-M3D177-A1-2005 UNSATURATED POLYESTER (UP) 50% LONG GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《50%长玻璃纤维增强的不饱和聚酯（UP）成型料 与标准FORD WSS-M99P.pdf

FORD WSS-M3D178-A1-2005 UNSATURATED POLYESTER (UP) INJECTION MOLDING COMPOUND 14% GLASS FIBER REINFORCED LOW PROFILE TO BE USED WITH FORD WSS-M99P1111-A 《14%玻璃纤维增强的低糙度不饱和聚酯(UP)注塑.pdf

FORD WSS-M3D178-A2-2005 UNSATURATED POLYESTER (UP) INJECTION MOLDING COMPOUND 13% GLASS FIBER REINFORCED EXTERIOR APPLICATIONS TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSS-M.pdf

FORD WSS-M3D178-A3-2014 UNSATURATED POLYESTER (UP) INJECTION MOLDING COMPOUND 14% GLASS FIBER REINFORCED EXTERIOR APPLICATIONS HIGH FILL CONTENT TO BE USED WITH FORD WSS-M99P1111-.pdf

FORD WSS-M3D180-A1-2005 EPOXY VINYL ESTER EVE MATRIX 32% GLASS FIBER REINFORCED SHEET MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《以乙烯基乙醚为基底的32%玻璃纤维增强的环氧基乙烯基酯片状成型料 与标准F.pdf

FORD WSS-M3D180-A2-2005 EPOXY VINYL ESTER EVE MATRIX 32% GLASS FIBER REINFORCED HIGH MODULUS SHEET MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《以乙烯基乙醚为基底的32%玻璃纤维增强的环氧基乙烯.pdf