SIS SS 14 23 82-1983 Ferritic stainless free-cutting steel《铁素体不锈钢易切削钢》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN EN ISO 19232-5-2013 Non-destructive testing - Image quality of radiographs - Part 5 Determination of the image unsharpness value using duplex wire-type image quality indicators.pdf

DIN EN ISO 1924-2-2009 Paper and board - Determination of tensile properties - Part 2 Constant rate of elongation method (20 mm min) (ISO 1924-2 2008) English version of DIN EN ISO.pdf

DIN EN ISO 19250-2013 Water quality - Detection of Salmonella spp (ISO 19250 2010) German version EN ISO 19250 2013《水质 沙门氏菌属的检测 (ISO 19250-2010) 德文版本EN ISO 19250-2013》.pdf

DIN EN ISO 1927-1-2012 Monolithic (unshaped) refractory products - Part 1 Introduction and classification (ISO 1927-1 2012) German version EN ISO 1927-1 2012《整体(未成型)耐火材料产品 第1部分 简介与.pdf

DIN EN ISO 1927-2-2013 Monolithic (unshaped) refractory products - Part 2 Sampling for testing (ISO 1927-2 2012) German version EN ISO 1927-2 2012《整体(粗制)耐火材料产品 第2部分 试验取样(ISO 1927-2.pdf

DIN EN ISO 1927-3-2013 Monolithic (unshaped) refractory materials - Part 3 Characterization as received (ISO 1927-3 2012) German version EN ISO 1927-3 2012《整体(粗制)耐火材料产品 第3部分 原样表征(I.pdf

DIN EN ISO 1927-4-2013 Monolithic (unshaped) refractory products - Part 4 Determination of consistency of castables (ISO 1927-4 2012) German version EN ISO 1927-4 2012《整体(粗制)耐火材料产品.pdf

DIN EN ISO 1927-5-2013 Monolithic (unshaped) refractory products - Part 5 Preparation and treatment of test pieces (ISO 1927-5 2012) German version EN ISO 1927-5 2012《整体(粗制)耐火材料产品 .pdf

DIN EN ISO 1927-6-2013 Monolithic (unshaped) refractory products - Part 6 Measurement of physical properties (ISO 1927-6 2012) German version EN ISO 1927-6 2012《整体(粗制)耐火材料产品 第6部分 物.pdf