SIS SS 14 27 10-1982 Tool steel cold and hot work steel《工具钢，冷，热加工钢 SS 不锈钢27 10》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN ISO 8205-3-2012 en Water-cooled secondary connection cables for resistance welding - Part 3 Test requirements《电阻焊接水冷二次接线连接电缆 试验要求》.pdf

EN ISO 8222-2002 en Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks《石油测量系统 校准 用容积基准测量罐的校正温度 ISO 8222-2002》.pdf

EN ISO 8224-1-2003 en Traveller irrigation machines - Part 1 Operational characteristics and laboratory and field test methods (Incorporates Amendment A1 2011)《移动式灌溉机械 第1部分 操作特征及实验.pdf

EN ISO 8230-1-2008 en Safety requirements for dry-cleaning machines - Part 1 Common safety requirements《干洗机安全要求 第1部分 通用安全要求［已替换 CEN EN ISO 8230］》.pdf

EN ISO 8230-2-2008 en Safety requirements for dry-cleaning machines - Part 2 Machines using perchloroethylene《干洗机的安全要求 第2部分 用四氯乙烯的机械［已替换 CEN EN ISO 8230］》.pdf

EN ISO 8230-3-2008 en Safety requirements for dry-cleaning machines - Part 3 Machines using combustible solvents《干洗机的安全要求 第3部分 用易燃溶剂的机械［已替换 CEN EN ISO 8230］》.pdf

EN ISO 8249-2000 en Welding - Determination of Ferrite Number (FN) in Austenitic and Duplex Ferritic-Austenitic Cr-Ni Stainless Steel Weld Metals《焊接 奥氏体和双重铁素体-奥氏体铬镍(Cr-Ni)不锈钢焊接金属中铁.pdf

EN ISO 8251-2011 en Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings《铝和铝合金的阳极化 阳极氧化镀层的耐磨性测量 》.pdf

EN ISO 8253-1-2010 en Acoustics - Audiometric test methods - Part 1 Pure-tone air and bone conduction audiometry《声学 听力测试方法 第1部分 纯音气导和骨导听阈[代替 CEN EN26189]》.pdf