SIS SS 14 80 01-1983 Powder metallurgy Sintered iron《粉末冶金 SS 烧结铁80 01》.pdf

相关资源

YB T 5308-2006 粉末冶金用还原铁粉.pdf

JIS Z2503-2000 粉末冶金用粉末.取样.pdf

FZ T 92050-1995 粉末冶金轴承.pdf

HB 5441.1-1989 粉末冶金制品和粉末的性能测试测定金属粉末粒度的筛分法.pdf

HB 5441.7-1989 粉末冶金制品和粉末的性能测试渗透性烧结金属材料密度和开孔度的测试方法.pdf

HB 5441.8-1989 粉末冶金制品和粉末的性能测试烧结金属衬套径向压溃强度的测定.pdf

HB 5458-1990 粉末冶金铜基多孔轴承.pdf

JB T 10310-2001 摩托车离合器用粉末冶金从动齿轮技术条件.pdf

JB T 10310-2011 摩托车离合器用粉末冶金从动齿轮 技术条件.pdf

JB T 2798-1999 铁基粉末冶金烧结制品金相标准.pdf

猜你喜欢

SAE AS 4159-1988 Specification for an Automated Interchange of Standards Data《标准数据的自动化交换用规范》.pdf

SAE AS 417A-1970 Air Data Computer MPS.pdf

SAE AS 418A-1961 Maximum Allowable Airspeed Instruments (Reciprocating Engine Powered Aircraft)《最大允许航速测量仪 (往复式发动机驱动的飞机)》.pdf

SAE AS 4194A-2007 Sheet and Strip Surface Finish Nomenclature《薄板材和带材的表面抛光术语》.pdf

SAE AS 41F-2013 Propeller Shaft Ends - Single Rotation《螺旋轴末端 单旋转》.pdf

SAE AS 4200A-1994 Fitting Assembly Adapter Ring Locked Port Connection to Beam Seal 8000 psi《FSC 4730适配器环锁紧端口连接到梁密封8 000 psi的配件总成》.pdf

SAE AS 4200B-2017 FITTING ASSEMBLY ADAPTER RING LOCKED PORT CONNECTION TO BEAM SEAL 8000 PSI.pdf

SAE AS 4201A-1998 PORT C RING LOCKED FLUID CONNECTION TYPE 8000 PSI DESIGN STANDARD《8000 psi环锁式流体连接端口设计标准》.pdf

SAE AS 4202A-1998 Adapter - Port Connection Ring Locked Design Installation and Removal of 8000 psi Systems《8 000 psi环锁端口连接适配器系统的设计 安装和拆除》.pdf