SIS SS 15 54 05-1984 Gas oil for heating purposes《取暖用柴油》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M4D664-B1-2011 POLYAMIDE (PA) 6 HEAT STABILIZED 30% GLASS FIBER REINFORCED MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《内部热稳定30%玻璃纤维增强聚酰胺(PA)6模塑材料 与福特.pdf

FORD WSS-M4D665-A3-2012 POLYAMIDE 6 (PA6) 15% GLASS FIBER REINFORCED POST INDUSTRIAL RECYCLATE (PIR) MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D665-B1-2016 POLYAMIDE (PA) 6 15% GLASS FIBER REINFORCED MOLDING COMPOUND GENERAL PURPOSE TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D665-B2-2017 POLYAMIDE (PA) 6 15% GLASS FIBER REINFORCED MOLDED IN COLOR INTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D666-A2-2006 POLYAMIDE 66 (PA66) IMPACT MODIFIED MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用冲击改性聚酰胺66成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSS-M4D666-B1-2014 POLYAMIDE (PA) 66 IMPACT MODIFIED HEAT STABILIZED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D667-B2-2016 POLYAMIDE (PA) 6 HEAT STABILIZED 40% MINERAL FILLED MOLDING COMPOUND PLATED INTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D668-A2-2006 POLYAMIDE (PA) 66 HEAT STABILIZED 43% GLASS FIBER REINFORCED INTERIOR 25% MINIMUM POST CONSUMER AND OR INDUSTRIAL RECYCLATE CONTENT TO BE USED WITH FORD WS.pdf

FORD WSS-M4D670-B1-2015 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) MOLDING COMPOUND 12% MINERAL FILLED TO BE USED WITH FORD WSS-M99P1111-A .pdf