SIS SS 27 02 32-1984 Building boards - Determination of water frost and heat influence on thickness and strength《建筑板材 水，霜冻和热影响下厚度和强度的测定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SAE AMS 3571 6C-2011 Resin Polyether Urethane (EU) Casting Flexible Solid Unfilled 95 Durometer A《95硬度计A未充填实心柔性聚醚氨基甲酸乙酯(EU)树脂铸件》.pdf

SAE AMS 3571 7C-2011 Resin Polyether Urethane (EU) Casting Flexible Solid Unfilled 55 Durometer D《55硬度计D未充填实心柔性聚醚氨基甲酸乙酯(EU)树脂铸件》.pdf

SAE AMS 3571 8C-2011 Resin Polyether Urethane (EU) Casting Flexible Solid Unfilled 65 Durometer D《65硬度计D未充填实心柔性聚醚氨基甲酸乙酯(EU)树脂铸件》.pdf

SAE AMS 3571 9C-2011 Resin Polyether Urethane (EU) Casting Flexible Solid Unfilled 75 Durometer D《75硬度计D未充填实心柔性聚醚氨基甲酸乙酯(EU)树脂铸件》.pdf

SAE AMS 3571C-2011 Resin Polyether Urethane (EU) Casting Flexible Solid Unfilled《未充填实心柔性聚醚氨基甲酸乙酯(EU)树脂铸件》.pdf

SAE AMS 3573C-2011 Resin Polyurethane (EU) Casting Polyether-Type Flexible Solid Low-Temperature Resistant 80 to 90《80至90耐低温实心的挠性聚醚型聚亚氨酯(EU)树脂铸件》.pdf

SAE AMS 3579D-1996 Plastic Tubing Electrical Insulation Non-Crosslinked Polyvinyl Chloride Flexible Heat Shrinkable 1 6 to 1 Shrink Ratio《热收缩比为1 6至1的柔性电气绝缘非交联聚氯乙烯塑料管》.pdf

SAE AMS 3587E-2011 Plastic Tubing Electrical Insulation Irradiated Polyolefin Pigmented Very Flexible Heat Shrinkable Low Recovery Temperature 2 to 1 Shrink Ratio《收缩率为2-1的热收缩(低回复温度.pdf

SAE AMS 3588E-2011 Plastic Tubing Electrical Insulation Irradiated Polyolefin Clear Very Flexible Heat Shrinkable 2 to 1 Shrink Ratio《收缩率为2-1的热收缩极高挠性的透明的辐照处理的电绝缘聚烯烃塑料管》.pdf