SIS SS 78 09 42-1980 Shipbuilding Rudders Bearings and couplings for spade rudders《造船 方向舵 铲型舵的轴承和联轴器》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SAE AS 9805-1998 BOLT MACHINE-HEXAGON HEAD PD SHANK AMS 5643 190-32 UNJF-3A《AMS 5643 PD杆六角头机器螺栓 190-32 UNJF-3A》.pdf

SAE AS 9821-1998 Bolt Machine - Hexagon Head Drilled 1 Hole PD Shank AMS 5643 500-20 UNJF-3A《AMS 5643 PD杆1钻孔六角头机器螺栓 500-20 UNJF-3A》.pdf

SAE AS 9841-1999 KEY WOODRUFF C CHAMFERED CRES AMS5640《半圆键 刻槽耐腐蚀钢AMS 5640 FSC 5315》.pdf

SAE AS 9842A-2004 Pin Straight Headed 0937 Diameter UNS S41800《 0937直径 UNS S41800直柄头销钉》.pdf

SAE AS 9843A-2004 PIN STRAIGHT HEADED 1249 DIAMETER UNS S41800《直柄、有头、直径为0 1249的销钉 UNS S41800》.pdf

SAE AS 9844A-2004 PIN STRAIGHT HEADED 1874 DIAMETER UNS S41800《直柄、有头、直径为0 1874的销钉 UNS S41800》.pdf

SAE AS 9845A-2004 PIN STRAIGHT HEADED 2499 DIAMETER UNS S41800《直柄、有头、直径为0 2499的销钉 UNS S41800》.pdf

SAE AS 9846A-2004 PIN STRAIGHT HEADED 3124 DIAMETER UNS S41800《直柄、有头、直径为0 3124的销钉 UNS S41800》.pdf

SAE AS 9847A-2004 PIN STRAIGHT HEADED 3749 DIAMETER UNS S41800《直柄、有头、直径为0 3749的销钉 UNS S41800》.pdf