SIS SS 2105-1990 ISO system of limits and fits ISO tolerances D6toD13 for holes《ISO限制和配合体系 ISO孔公差D6-D13》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SAE AS 3089B-2016 STUD STRAIGHT KEY LOCKED CADMIUM PLATED STEEL UNS G87400 3750-24 UNJF-3A X 3750-24 UNJF-3A.pdf

SAE AS 3090-1975 STUD - STRAIGHT KEY LOCKED CRES AMS5731 190-32 UNJF X 190-32 UNJF《CRES AMS 5731、 190-32 UNJFX和 190-32 UNJF的键锁直螺柱》.pdf

SAE AS 3091-1975 STUD - STRAIGHT KEY LOCKED CRES AMS5731 250-28 UNJF X 250-28 UNJF《CRES AMS 5731、 250-28 UNJF的键锁直螺柱》.pdf

SAE AS 3092-1975 STUD - STRAIGHT KEY LOCKED CRES AMS5731 3125-24 UNJF X 3125-24 UNJF《CRES AMS 5731、3125-24 UNJF X和 3125-24 UNJF的键锁直螺柱》.pdf

SAE AS 3093-1975 STUD - STRAIGHT KEY LOCKED CRES AMS5731 375-24 UNJF X 375-24 UNJF《CRES AMS 5731、 375-24 UNJF X和 375-24 UNJF的键锁直螺柱》.pdf

SAE AS 3094-1974 INSERT - CRES HELICAL COIL FINE THREAD LOCKING (LOW FRICTION SYSTEMS) 1 5 DIA NOM LENGTH《1 5mm直径、标准长度、锁紧CRES螺旋型线圈细螺纹(低摩擦系统)嵌镶件》.pdf

SAE AS 3095-1974 INSERT - CRES HELICAL COIL FINE THREAD LOCKING (LOW FRICTION SYSTEMS) 2 DIA NOM LENGTH《2mm直径、标准长度、锁紧CRES螺旋型线圈细螺纹(低摩擦系统)嵌镶件》.pdf

SAE AS 3096-1974 INSERT - CRES HELICAL COIL FINE THREAD LOCKING (LOW FRICTION SYSTEMS) 2 5 DIA NOM LENGTH《2 5mm直径、标准长度、锁紧CRES螺旋型线圈细螺纹(低摩擦系统)嵌镶件》.pdf

SAE AS 3097-1974 INSERT - CRES HELICAL COIL FINE THREAD LOCKING (LOW FRICTION SYSTEMS) 3 DIA NOM LENGTH《3mm直径、标准长度、锁紧CRES螺旋形线圈细螺纹(低摩擦系统)嵌镶件》.pdf