SIS SS 3222-1984 Threaded stainless steel pipe fittings - Round caps with internal parallel pipe thread《螺纹不锈钢管件 有内部平行管螺纹的圆形帽》.pdf

相关资源

JIS G3468-2004 大口径焊接不锈钢管.pdf

JIS G3447-2004 环境卫生用不锈钢管.pdf

JIS G3448-1980 一般管道用不锈钢管.pdf

DL T 1324-2014 锅炉奥氏体不锈钢管内壁氧化物堆积磁性检测技术导则.pdf

CB T 4154-2011 船用不锈钢管简选系列.pdf

CB T 4201-2011 不锈钢管对焊接头.pdf

CECS 229-2008 自动喷水灭火系统薄壁 不锈钢管管道工程技术规程.pdf

CECS 277-2010 建筑给水排水薄壁不锈钢管 连接技术规程.pdf

EJ T 410-1999 压水堆核电厂—回路工艺系统冷轧、冷拔无缝不锈钢管技术条件.pdf

CB T 4113-2016 船舶不锈钢管对接焊技术要求.pdf

猜你喜欢

NASA-TN-D-4821-1968 Effect on base drag of recessing the bases of conical afterbodies at subsonic and transonic speeds《在亚音速和跨音速下 圆锥后体基底凹槽底部阻力的影响》.pdf

NASA-TN-D-4856-1968 Aerodynamic characteristics of twin-propeller deflected-slipstream STOL airplane model with boundary-layer control on inverted V-tail《在反向V尾翼上带有边界层控制的双螺旋浆偏转滑流短距离.pdf

NASA-TN-D-4891-1968 Prediction of lift and drag for slender sharp-edge delta wings in ground proximity《在近地时 细长锐边三角形机翼升力和阻力的预测》.pdf

NASA-TN-D-4929-1968 Theory for computing span loads and stability derivatives due to sideslip yawing and rolling for wings in subsonic compressible flow《在亚音速可压缩流下机翼的侧滑 偏航和旋转引起的翼展荷载.pdf

NASA-TN-D-4983-1969 Full-scale wind-tunnel investigation of static longtudinal and lateral characteristics of a light twin-engine airplane《轻型双发动机飞机静态纵向和横向特性的全比例风洞研究》.pdf

NASA-TN-D-5054-1969 Experimental pressure distributions on a 120 degrees cone at Mach numbers from 2 96 to 4 63 and angles of attack from 0 degrees to 20 degrees《当马赫数为2 96至4 63且攻角为.pdf

NASA-TN-D-5095-1969 Noncavitating and cavitating performance of several low area ratio water jet pumps having throat lengths of 3 54 diameters《带有3 54直径咽喉区长度的若干低面积比的喷水泵不成穴和成穴性能》.pdf

NASA-TN-D-5102-1969 Large-scale tests of an airplane model with a double-delta wing including longitudinal and lateral characteristics and ground effects《带有双三角形机翼飞机模型的大型试验(包括纵向和横向特.pdf

NASA-TN-D-5153-1969 The use of pilot rating in the evaluation of aircraft handling qualities《飞机飞行品质评估对飞行员评级的使用》.pdf