SIS SS EN 50 039-1983 Electrical apparatus for potentially explosive atmospheres - Intrinsically safe electrical systems i 《防爆电气设备 内在安全电气系统“i”》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 16220-1979 Organic dyestuffs Vat brilliant green ZHD Specifications《有机染料 瓮亮绿ZhD 规范》.pdf

GOST 16221-1979 Yourts felt Specifications《毡帐 规范》.pdf

GOST 16222-1981 Shell end milling cutters for machining light alloys Design and dimensions《加工轻合金用套式面铣刀 结构及尺寸》.pdf

GOST 16223-1981 Shell end milling cutters with inserted carbide blades for machining light alloys Types and dimensions《轻合金加工用带镶齿硬质合金刀片的圆筒形端铣刀 类型和尺寸规格》.pdf

GOST 16224-1981 Wedge shaped ribbed blades with carbide tirs for shell end milling cutters for machining light alloys Design and dimensions《轻合金加工用套式面铣刀用镶硬质合金片的楔形齿纹刀片 结构及尺寸》.pdf

GOST 16225-1981 Shank cutters for machining light alloys Types and dimensions《轻合金加工用立铣刀 类型和尺寸规格》.pdf

GOST 16226-1981 End double-tooth mill thereaded shank for machining light alloys Design and dimensions《轻合金加工用立双齿铣刀螺纹铣尾 设计和尺寸规格》.pdf

GOST 16227-1981 Three angle disk cutters for machining light alloys Design and dimensions《加工轻合金用三面刃圆盘铣刀 结构及尺寸》.pdf

GOST 16228-1981 Three angle disk cutters with inserted blades for machining light alloys Design and dimensions《轻合金加工用带镶齿刀头的三角度圆片铣刀 设计和尺寸规格》.pdf