SIS SS EN 50 045-1989 Low-voltage switchgear and controlgear for industrial use Mounting rails Top hat rails 15 mm wide for the fixing of terminal blocks《工业用低压成套开关设备和控制设备 安装导轨 顶帽式导.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN 10149-1-2013 en Hot rolled flat products made of high yield strength steels for cold forming - Part 1 General technical delivery conditions《冷成型用高屈服强度钢热轧扁平制品 第1部分 通用技术交货条件》.pdf

EN 10149-2-2013 en Hot rolled flat products made of high yield strength steels for cold forming - Part 2 Technical delivery conditions for thermomechanically rolled steels《冷成型用高屈服强.pdf

EN 10149-3-2013 en Hot rolled flat products made of high yield strength steels for cold forming - Part 3 Technical delivery conditions for normalized or normalized rolled steels《冷成.pdf

EN 1015-1-1998 en Methods of Test for Mortar for Masonry - Part 1 Determination of Particle Size Distribution (by Sieve Analysis) (Incorporates Amendment A1 2006)《圬工灰浆试验方法 第1部分 粒度分.pdf

EN 1015-10-1999 en Methods of Test for Mortar for Masonry - Part 10 Determination of Dry Bulk Density of Hardened Mortar (Incorporates Amendment A1 2006)《圬工灰浆试验方法 第10部分 硬化灰浆干块密度测定 .pdf

EN 1015-11-1999 en Methods of Test for Mortar for Masonry - Part 11 Determination of Flexural and Compressive Strength of Hardened Mortar (Incorporates Amendment A1 2006)《圬工灰浆试验方法 .pdf

EN 1015-12-2000 Methods of Test for Mortar for Masonry - Part 12 Determination of Adhesive Strength of Hardened Rendering and Plastering Mortars on Substrates《圬工辅助砌块的试验方法 第12部分 衬底上.pdf

EN 1015-12-2016 en Methods of test for mortar for masonry - Part 12 Determination of adhesive strength of hardened rendering and plastering mortars on substrates《圬工辅助元件的试验方法-第12部分 .pdf

EN 1015-17-2000 en Methods of test for mortar for masonry - Part 17 Determination of water-soluble chloride content of fresh mortars (Incorporates Amendment A1 2004)《圬工灰浆试验方法 第17部分.pdf