SIS SS IEC 593-1988 Power capacitors Internal fuses and interna overpressure disconnectors forshunt capacitors《电力电容器 并联电容器内部熔断器以及内部过压断路器》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

JB T 7966.3-1999 模具铣刀 第3部分 莫氏锥柄圆柱形球头立铣刀.pdf

JB T 7966.4-1999 模具铣刀 第4部分 直柄圆锥形立铣刀.pdf

JB T 7966.5-1999 模具铣刀 第5部分 削平型直柄圆锥形立铣刀.pdf

JB T 7966.6-1999 模具铣刀 第6部分 直柄圆锥形球头立铣刀.pdf

JB T 7966.7-1999 模具铣刀 第7部分 削平型直柄圆锥形球头立铣刀.pdf

JB T 7966.8-1999 模具铣刀 第8部分 莫氏锥柄圆锥形立铣刀.pdf

JB T 7966.9-1999 模具铣刀 第9部分 莫氏锥柄圆锥形球头立铣刀.pdf

JB T 7967-1999 渐开线内花键插齿刀基本型式和尺寸.pdf

JB T 7967-2010 渐开线内花键插齿刀 型式和尺寸.pdf