SIS SS-ISO 1458-1991 Metallic coatings Electrodeposited coatings of nickel《金属涂层 镍电镀层》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN ISO 17641-2-2015 en Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Part 2 Self-restraint tests《金属材料焊接的破坏性测试 焊件的热裂纹.pdf

EN ISO 17642-1-2004 en Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 1 General《金属材料的焊接的有损试验 焊件的冷裂试验弧焊过程 第1部分 通.pdf

EN ISO 17642-2-2005 en Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 2 Selfrestraint tests《金属材料焊接的有损试验 焊接的冷裂试验.pdf

EN ISO 17642-3-2005 en Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 3 Externally loaded tests《金属材料焊接的有损试验焊接的冷.pdf

EN ISO 17643-2015 en Non-destructive testing of welds - Eddy current examination of welds by complex plane analysis《焊缝的无损检测 复杂平面分析焊缝涡流检测（ISO 17643 2015）》.pdf

EN ISO 17652-1-2003 en Welding - Test for Shop Primers in Relation to Welding and Allied Processes - Part 1 General Requirements《焊接 与焊接和相关工艺有关的工厂底漆的试验 第1部分 一般要求ISO 17652-1-2003》.pdf

EN ISO 17652-2-2003 en Welding - Test for Shop Primers in Relation to Welding and Allied Processes - Part 2 Welding Properties of Shop Primers《焊接 与焊接和相关工艺有关的工厂底漆的试验 第2部分 工厂底漆的焊接特性I.pdf

EN ISO 17652-3-2003 en Welding - Test for Shop Primers in Relation to Welding and Allied Processes - Part 3 Thermal Cutting《焊接 与焊接和相关工艺有关的工厂底漆的试验 第3部分 热切割ISO 17652-3-2003》.pdf

EN ISO 17652-4-2003 en Welding - Test for Shop Primers in Relation to Welding and Allied Processes - Part 4 Emission of Fumes and Gases《焊接 与焊接和相关工艺有关的工厂底漆的试验 第4部分 烟气和气体排放ISO 17652-.pdf