SIS SS-ISO 5744-1991 Pliers and nippers Methods of test《钳子和镊子 试验方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SANS 94-2-2003 Textile slings - Safety Part 2 Roundslings made of man-made fibres for general purpose use《织物吊环 安全性 第2部分：圆形吊带 一般用途的人工纤维吊带》.pdf

SANS 940-2005 Emulsion roof paint《天花板乳胶漆》.pdf

SANS 9408-1999 Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium by determination of oxygen demand in a closed respirometer《水质 .pdf

SANS 943-2008 Man-made fibre ropes《人造纤维绳》.pdf

SANS 945-1-2006 Support and compression bandages Part 1 Woven crêpe bandages《支撑绷带和压力绷带 第1部分：机织绷带》.pdf

SANS 945-2-2002 Support and compression bandages Part 2 Warp-knitted bandages《支撑绷带和压力绷带 第1部分：经编绷带》.pdf

SANS 9454-1-1990 Soft soldering fluxes - Classification and requirements Part 1 Classification labelling and packaging《软钎焊剂 分类和要求 第1部分：分类，标记和包装》.pdf

SANS 9454-2-1998 Soft soldering fluxes - Classification and requirements Part 2 Performance requirements《软钎焊剂 分类和要求 第2部分：性能要求》.pdf

SANS 9455-1-1990 Soft soldering fluxes - Test methods Part 1 Determination of non-volatile matter gravimetric method《软钎焊剂 试验方法 第1部分：不挥发性物质的测定 重量分析法》.pdf