SIS SS-ISO 8526-1-1992 Modul r units for machine tools Work- holding pallets Part 1 Workholding pallets up to 800 mm nominal size《 组合机床部件 工件夹板 第1部分：标注尺寸800毫米及以下的工件夹板》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

QJ 2602-1994 MJ螺纹1100MPa钛合金螺栓技术条件.pdf

QJ 2603-1994 出口航天产品用产品证明书编写规定.pdf

QJ 2604-1994 固体战略导弹水平装填设备通用规范.pdf

QJ 2605-1994 中高空地空导弹运输装填车通用规范.pdf

QJ 2606-1994 屏蔽保温车厢通用技术条件.pdf

QJ 2607-1994 地面设备伺服液压马达通用技术条件.pdf

QJ 2608-1994 军用方舱规范.pdf

QJ 2609-1994 固体火箭发动机燃烧室高能X射线探伤方法.pdf

QJ 261-1994 电子产品钣金冲压件通用技术条件.pdf