SNI 03-6813-2002 Procedure for making test cylinders and prisms for determining strength and density of preplaced-agregate concrete in laboratory《试验用气缸和棱镜用以在实验室确定预制混凝土骨料强度和密度的制作规程》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

QJ 769(5)-1982 拉杆螺母.pdf

QJ 769(6)-1982 钢带.pdf

QJ 769(7)-1982 打包夹.pdf

QJ 771-1983 未注公差尺寸的极限偏差.pdf

QJ 782A-2005 铆接通用技术要求.pdf

QJ 783-1983 地－空和舰－空导弹自动驾驶仪通用技术条件.pdf

QJ 790A-1997 机床夹具零件及部件 长方头螺钉.pdf

QJ 791A-1997 机床夹具零件及部件 轴位螺钉.pdf

QJ 792A-1997 机床夹具零件及部件 带换向手柄压紧螺钉.pdf