SNI 06-6989 26-2005 Water and wastewater - Part 26 Test methods of total solid content by gravimetric analysis《给水和排水 第26部分 重量分析法测定固体总量的试验方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CSN ON 22 0846-1963 《刀毛坯切割板 右边》.pdf

CSN ON 22 0847-1963 《切割板粗糙复制刀 左》.pdf

CSN ON 22 0848-1963 《加工刀具板，右边》.pdf

CSN ON 22 0849-1963 《复制刀切割板 左》.pdf

CSN ON 22 0869-1963 《切割板，深入到砌体》.pdf

CSN ON 22 0890-1963 《用于小口径岩石钻头的刀刃（钻探）》.pdf

CSN ON 22 0891-1963 《切割板用于牙冠钻头（钻探）》.pdf

CSN ON 22 1147-1968 《带圆锥杆的钻头》.pdf

CSN ON 22 1459-1968 《用于协调旋转的带圆锥柄的钻孔器》.pdf