SNI 07-3651 4-1995 Prestressed concrete steel wire Part 4 Stranded《钢筋混泥土 第4部分：标准》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM F2735-2009 Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing《SDR9交联聚乙烯(PEX)和升温聚.pdf

ASTM F2735-2009(2016) Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing《SDR9交联聚乙烯 (P.pdf

ASTM F2736-2010 Standard Specification for 6 to 30 in (152 To 762 mm) Polypropylene (PP) Corrugated Single Wall Pipe And Double Wall Pipe《波纹状的单壁管和双壁管6-30 in (152-762 mm)聚丙烯(PP)用标准规.pdf

ASTM F2736-2012 Standard Specification for 6 to 30 in (152 To 762 mm) Polypropylene (PP) Corrugated Single Wall Pipe And Double Wall Pipe《6到30 英寸 (152到762 mm) 聚丙烯 (PP) 波纹单壁管和双壁管的标准.pdf

ASTM F2736-2013 Standard Specification for 6 to 30 in (152 To 762 mm) Polypropylene (PP) Corrugated Single Wall Pipe And Double Wall Pipe《6到30 英寸 (152到762 mm) 聚丙烯 (PP) 波纹单壁管和双壁管的标准.pdf

ASTM F2737-2010 Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units《起皱的高密度聚乙烯(HDPE)水质单位用标准规范》.pdf

ASTM F2737-2010a Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units《起皱的高密度聚乙烯(HDPE)水质单位用标准规范》.pdf

ASTM F2737-2011 Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units《波纹高密度聚乙烯(HDPE)水质结构的标准规范》.pdf

ASTM F2737-2011(2017) Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units《波纹状高密度聚乙烯(HDPE)水质量装置的标准规格》.pdf