SNI 08-1111-1989 Test method for fineneas of flax fibre《亚麻纤维柔韧性能测试方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NBN EN 715-1994 8750 Thermoplastics piping systems - End-load bearing joints between small diameter pressure pipes and fittings - Test method for leaktightness under internal water.pdf

NBN EN 724-1995 7500 Guidance on the application of EN 29001 and EN 46001 and of EN 29002 and EN 46002 for non- active medical devices《非放射性医疗器械用EN29001，EN46001，EN29002，EN46002标准的应用.pdf

NBN EN 725-3-1994 6250 Advanced technical ceramics - Methods of test for ceramic powders - Part 3 Determination of the oxygen content of non-oxides by thermal extraction with a ca.pdf

NBN EN 727-1994 5000 Plastics piping and ducting systems - Thermoplastics pipes and fittings - Determination of Vicat softening temperature (VST)《塑料管道和管道系统 热塑性塑料管和配件，维卡（vicat）软化温度的.pdf

NBN EN 729-1-1994 6250 Quality requirements for welding - Fusion welding of metallic materials - Part 1 Guidelines for selection and use《焊接技术质量要求 金属材料熔焊 第1部分：选择和使用规则》.pdf

NBN EN 729-2-1994 1250 Quality requirements for welding - Fusion welding of metallic materials - Part 2 Comprehensive quality requirements《焊接技术质量要求 金属材料熔焊 第2部分：全面质量要求》.pdf

NBN EN 729-3-1994 6875 Quality requirements for welding - Fusion welding of metallic materials - Part 3 Standard quality requirements《焊接技术质量要求 金属材料熔焊 第3部分：标准质量要求》.pdf

NBN EN 729-4-1994 0000 Quality requirements for welding - Fusion welding of metallic materials - Part 4 Elementary quality requirements《焊接技术质量要求 金属材料溶焊 第4部分：基本质量要求》.pdf

NBN EN 742-1994 8125 Identification card systems - Intersector ID-1 card location of contacts for cards and devices used in Europe《识别卡系统 内插卡ID-1 的接触位置及在欧洲使用的组合设备》.pdf