SNI 09-0883-1989 Rim contour for automobiles《汽车用轮毂》.pdf

相关资源

SIS SMS 1309-1945 《轮毂 前轮毂带锥轴承 滚珠座圆》.pdf

SIS SMS 367-1945 《自行车 轮毂 带锥形轴承的前轮毂》.pdf

JB T 10238-2011 滚动轴承 汽车轮毂轴承单元.pdf

JB T 10238-2011 滚动轴承.汽车轮毂轴承单元.pdf

JB T 10238-2001 汽车轮毂轴承单元.pdf

JB T 13353-2017 《滚动轴承 汽车轮毂轴承单元试验及评定方法》.pdf

KS B 3039-2012 Hub bearing nut wrench《轮毂轴承螺母用扳钳》.pdf

JB T 9005.3-1999 起重机用铸造滑轮 型式、轮毂和轴承尺寸.pdf

JB T 9005.3-1999 起重机用铸造滑轮.型式、轮毂和轴承尺寸.pdf

SH T 0773-2005 汽车轮毂轴承润滑脂寿命特性测定法.pdf

猜你喜欢

GOST 22073-1976 Guide bushings of injection moulds Design and dimensions《压力热塑铸造用压模导向衬套 结构及尺寸》.pdf

GOST 22074-1976 Short guide bushings of injection moulds Design and dimensions《压力热塑铸造用压模截短导向衬套 结构及尺寸》.pdf

GOST 22075-1976 Locating bushings of injection moulds Design and dimensions《压力热塑铸造用压模定心衬筒 结构及尺寸》.pdf

GOST 22076-1976 Supporting disks of injection moulds Design and dimensions《压力热塑铸造用压模支撑垫圈 结构及尺寸》.pdf

GOST 22077-1976 Sprue bushings of injection moulds Design and dimensions《压力热塑铸造用压模浇注管套管 结构及尺寸》.pdf

GOST 22078-1976 Central bushings of injection moulds Design and dimensions《压力热塑铸造用压模中心衬套 结构及尺寸》.pdf

GOST 22079-1976 Shanks of injection moulds Design and dimensions《压力热塑铸造用压模模柄 结构及尺寸》.pdf

GOST 22080-1976 Shouldered shanks of injection moulds Design and dimensions《压力热塑铸造用压模带肩模柄 结构及尺寸》.pdf

GOST 22081-1976 Flange-blanks of injection moulds Design and dimensions《压力热塑铸造用压模法兰坯料 结构及尺寸》.pdf