SNI 09-1253-1989 Parking brake for motor vehicles on mounting slope Performance test《机动车制动刹 性能测试》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D7049-2004(2010) 6250 Standard Test Method for Metal Removal Fluid Aerosol in Workplace Atmospheres《工作场所空气中金属切削液浮质的试验方法》.pdf

ASTM D7049-2017 red 3750 Standard Test Method for Metalworking Fluid Aerosol in Workplace Atmospheres《工作场所空气中金属切削液浮质的标准试验方法》.pdf

ASTM D7050-2004 Standard Practice for Rubber from Natural Sources-Sampling and Sorting Bales Based on Predicted Processing Properties《天然橡胶的标准规程 基于预测加工性能的取样和分类》.pdf

ASTM D7050-2004(2009) 6250 Standard Practice for Rubber from Natural Sources-Sampling and Sorting Bales Based on Predicted Processing Properties《天然橡胶的标准实施规程-基于预测加工性能的取样和分类》.pdf

ASTM D7050-2004(2014) 8362 Standard Practice for Rubber from Natural SourcesSampling and Sorting Bales Based on Predicted Processing Properties《天然橡胶以及基于预测加工性能的取样和分类包的标准实施规程》.pdf

ASTM D7051-2005 Standard Test Method for Cyclic Thermal Shock of SBS-Modified Bituminous Roofing Sheets with Factory-Applied Metal Surface《带厂用金属表面的SBS改良沥青屋顶板材的循环热冲击标准试验方法》.pdf

ASTM D7051-2005(2013) 1875 Standard Test Method for Cyclic Thermal Shock of SBS-Modified Bituminous Roofing Sheets with Factory-Applied Metal Surface《带厂用金属表面的SBS改良沥青屋顶板材的循环热冲击的标准试验.pdf

ASTM D7052 D7052M-2017 0615 Standard Test Method for Determining Impact Resistance of New Low Slope Roof Membranes Using Steel Balls (Z8295Z)《用钢球(Z8295Z)测定新的低坡屋顶膜耐冲击性的标准试验方法》.pdf

ASTM D7053 D7053M-2011 6250 Standard Guide for Determining and Evaluating Causes of Water Leakage of Low-Sloped Roofs《测定和评定低斜房顶漏水起因的标准指南》.pdf