SNI 7213-2014 Selang karet untuk kompor gas LPG.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CSN 42 0317-1980 Metal testing Test pieces of circular cross-section with upset gripped heads for tensile testing of metals《金属拉伸试验用的定位环圆截面镦粗夹头试件》.pdf

CSN 42 0319-1982 Metal testing Test pieces of rectangular cross-section thickness 4 up to 50 mm and including for tensile testing of metals《金属拉伸试验用的试件的矩形截面厚度为4到50毫米（包括50毫米在内）》.pdf

CSN 42 0321-1982 Metal testing Test pieces of rectangular cross-section thickness from 0 1 to 4 mm for tensile testing of metals《金属拉伸试验用的试件的矩形截面，厚度达0 1毫米但小于4毫米》.pdf

CSN 42 0323-1982 Metal testing Tensile testing of metals Sheets strips thickness from 0 1 up to 0 5 mm《金属拉伸试验 板材 带材 厚度大于0 1mm小于0 5mm》.pdf

CSN 42 0330-1983 Metal testing Grey cast iron Determination of tensile strength《灰口铸铁 拉伸强度的测定》.pdf

CSN 42 0331-1985 Metal testing Test pieces of circular cross-section with cylindrical gripped heads for tensile testing of malleable cast iron《做可锻铸铁拉伸试验用的带圆柱夹头的圆截面试件》.pdf

CSN 42 0332-1982 Aluminum-base alloy and zinc-base alloy casting Pressure die-cast test pieces for determination of mechanical properties《铝基合金铸件和锌基合金铸件 用于测定机械特性的压铸试件》.pdf

CSN 42 0333-1972 Metal testing Separately sand cast bars for tensile test Magnesium and magnesium alloys《分砂铸拉伸试验棒 镁及其合金》.pdf

CSN 42 0334-1987 Aluminum alloy casting Casting and preparation of the test pieces for determination of mechanical properties《铝合金铸件 机械性能测定用的铸件和试件制备》.pdf