SNV 742 402 25-1971 《沥青膏 163C情况下确定重量损坏，5小时》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS EN 12710-2006 Fibreboard drums - Removable head (open head) drums with closing rings with a nominal capacity of 15 l to 250 l《纤维板鼓型桶 公称容量15l-250l带卡圈的活动头（开口）纸筒》.pdf

BS EN 12712-2000 Plastics jerricans Jerricans with a nominal capacity of 20 l to 60 l for optimal utilization of pallet sizes 800 mm x 1200 mm 1000 mm x 1200 mm and 1140 mm x 1140 .pdf

BS EN 12713-2000 Screw cap closure systems for plastics containers with a nominal capacity of 20 L to 60 L《标称容量为20升至60升的塑料容器的螺纹帽封闭系统》.pdf

BS EN 12714-2009 Plastics drums - Removable head (open head) drums with a nominal capacity of 25 L to 60 L《塑料桶 额定容量为25 L至60 L的活动盖(开口)桶》.pdf

BS EN 12715-2000 Execution of special geotechnical work Grouting《特殊土工工程的施工 水泥浆》.pdf

BS EN 12716-2001 Execution of special geotechnical works - Jet grouting《特殊土工工程的施工的执行 喷射灌浆》.pdf

BS EN 12726-2000 Packaging Cork mouth finish with a bore diameter of 18 5 mm for corks and tamper evident capsules《包装 口径为18 5 mm的瓶口用软木塞和锥度明显的瓶塞》.pdf

BS EN 12727-2016 Furniture Ranked seating Requirements for safety strength and durability《家具 成排座椅 安全、强度和耐久性的要求》.pdf

BS EN 12728-2000 Surface active agents - Determination of foaming power - Perforated disc beating method《表面活性剂 发泡能力测定 多孔圆盘敲击法》.pdf