SR ISO 305-1995 Plastics - Determination of thermal stability of polyvinyl chloride related chlorine-containing polymers and copolymers and their compourids - Discoloration method《.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS 3L 81-1985 Specification for sheet and strip of aluminium-21 4% magnesium alloy (temper designation H16 or H26)《铝-镁2 25%合金板材和带材规范(强度符号-H16或H26)》.pdf

BS 3N 3-2000 Breathing oxygen for airborne applications《航空用供氧装置》.pdf

BS 3S 102-1969 Specification for carbon-molybdenum steel (bar for the manufacture of forged bolts only)《碳钼钢(仅供锻造螺栓用的棒材)规范》.pdf

BS 3S 132-1976 Specification - 3% chromium-molybdenum-vanadium steel billets bars forgings and parts (1320-1470 MPa limiting ruling section 70 mm) (suitable for nitriding)《含3%铬-钼-钒.pdf

BS 3S 144-1995 Specification for chromium-nickel-copper-molybdenum corrosion resisting steel (precipitation hardening) billets bars forgings and parts (1130-1330 MPa)《铬-镍-铜-钼耐腐蚀(沉淀.pdf

BS 3S 145-1996 Specification for chromium-nickel-copper-molybdenum corrosion resisting steel (precipitation hardening) billets bars forgings and parts (1270 MPa to 1470 MPa)《铬-镍-铜-.pdf

BS 3S 98-2014 Specification for 2 5% nickel-chromium-molybdenum (high carbon) steel billets bars forging and parts (1 160 - 1 310 MPa limiting ruling section 155 mm)《2 5%镍-铬-钼 (高碳).pdf

BS 3SP 1-2013 Specification Shackles carbon steel cadmium plated for aircraft《规格 航空器用镀镉碳钢钩环》.pdf

BS 3SP 168-169-2002 Ferrules and assembly wires for braided rubber cord assemblies for aerospace use《航空航天用的编织橡胶绳组件的外用套管和组合金属丝》.pdf