SR ISO 5050-1995 Continuous mechanical handling equipment - Vertical bucket elevators with calibrated round steel link chains - General characteristics《连续机械装卸设备 有标定的圆钢环链的垂直斗式提升机 一般.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NF A81-365-2-1995 Soft soldering fluxes Test methods Part 2 determination of non-volatile matter ebulliometric method 《软钎焊剂 试验方法 第2部分 不挥发物的测定 沸点计法》.pdf

NF A81-365-3-1994 Soft soldering fluxes Test methods Part 3 determination of acid value potentiometric and visual titration methods 《软钎焊剂 试验方法 第3部分 酸值的测定 电势法和目测滴定法》.pdf

NF A81-365-6-1997 Soft soldering fluxes Test methods Part 6 determination and detection of halide (excluding fluoride) content 《软钎焊剂 试验方法 第6部分 卤化物(不包括氟化物)含量测定(欧洲标准EN ISO 9455-6)》.pdf

NF A81-365-8-1993 Solft soldering fluxes Test methods Part 8 determination of zinc content 《软钎焊剂 试验方法 第8部分 锌含量的测定》.pdf

NF A81-365-9-1995 Soft soldering fluxes Test methods Part 9 determination of ammonia content 《软钎焊剂 试验方法 第9部分 氨含量测定》.pdf

NF A81-373-1-1998 Solder wire solid and flux cored Specification and test methods Part 1 classification and performance requirements 《助熔填充焊丝和实芯焊条 规范和试验方法 第1部分 分类和性能要求(欧洲标准EN ISO 1.pdf

NF A81-373-2-1999 Flux cored solder wire Specification and test methods Part 2 determination of flux content 《软钎焊用药芯焊丝 规范和试验方法 第2部分 钎剂含量的测定》.pdf

NF A81-380-1997 Soldering and brazing materials Methods for sampling of soft solders for analysis 《软钎焊材料和硬焊材料 软焊料分析取样方法(欧洲标准EN ISO 10564)》.pdf

NF A81-950-1991 Arc welding Covered electrodes for wet manual welding depositing a mild alloy steel Specification 《电弧焊 沉积软合金钢的湿式手工焊接用涂药焊条 规范》.pdf