SS 52-1971 RULES FOR THE USE OF UNITS OF THE INTERNATIONAL SYSTEM (SI)《国际单位制的使用规则》.pdf

相关资源

JIS Z8203-2000 国际单位制(SI)及其组合形式和某些其它单位的使用推荐规程 (如无法正确阅读Foxit Reader打开).pdf

GB 3100-1993 国际单位制及其应用.pdf

GB T 9648-1988 国际单位制代码.pdf

STAS 9446-1985 USING OF MEASURE LEGAL UNITS OUTSIDE THE INTERNATIONAL SYSTEM OF UNITS《利用国际单位制以外的法定计量单位 》.pdf

STAS 10085 2-1986 MEASURE UNITS OUTSIDE INTERNATIONAL SYSTEM OF UNITS (SI) Conversion factors《国际单位制（SI）以外测量单位的换算系数 》.pdf

ASME B89 7 5-2006 Metrological Traceability of Dimensional Measurements to the SI Unit of Length《长度国际单位制尺寸测量的计量溯源(ASME 技术报告)》.pdf

CNS 10987-2007 International system of units《国际单位制(SI)》.pdf

GOST 20403-1975 Rubber Method for determination hardness in international units (30 to 100 IRHD)《橡胶 用国际单位制（3～100IRHD）的硬度测测定法》.pdf

ITU-T B 3 SPANISH-1993 USE OF THE INTERNATIONAL SYSTEM OF UNITS (SI)《国际单位制(SI)的使用》.pdf

ITU-T B 3-1993 USE OF THE INTERNATIONAL SYSTEM OF UNITS (SI)《国际单位制(SI)的使用》.pdf

猜你喜欢

DLA MS35335 REV G VALID NOTICE 1-2009 Washer Lock Flat-External Tooth.pdf

DLA MS35335 REV G-2004 WASHER LOCK FLAT-EXTERNAL TOOTH《外齿锁紧垫圈》.pdf

DLA MS35336 REV D (1)-1996 WASHER LOCK COUNTERSUNK 80 DEG 82 DEG EXTERNAL TOOTH (IN MM)《英寸／毫米外齿DEG80 DEG82螺旋锁紧垫圈》.pdf

DLA MS35336 REV D NOTICE 1-2000 WASHER LOCK COUNTERSUNK 80 DEG 82 DEG EXTERNAL TOOTH (IN MM)《英寸／毫米外齿DEG80 DEG82螺旋锁紧垫圈》.pdf

DLA MS35336 REV D VALID NOTICE 2-2005 WASHER LOCK COUNTERSUNK 80 DEG 82 DEG EXTERNAL TOOTH (IN MM)《英寸／毫米外齿DEG80 DEG82螺旋锁紧垫圈》.pdf

DLA MS35336 REV D-1970 WASHER LOCK COUNTERSUNK 80 DEG 82 DEG EXTERNAL TOOTH (IN MM)《英寸／毫米外齿DEG80 DEG82螺旋锁紧垫圈》.pdf

DLA MS35340 REV F (1)-2002 WASHER LOCK-HELICAL SPRING EXTRA DUTY (EXTRA-HEAVY) SERIES《额外任务重型系列弹簧螺旋紧锁垫圈》.pdf

DLA MS35340 REV F NOTICE 1-2000 WASHER LOCK-HELICAL SPRING EXTRA DUTY (EXTRA-HEAVY) SERIES《额外任务重型系列弹簧螺旋紧锁垫圈》.pdf

DLA MS35340 REV F-1993 WASHER LOCK-HELICAL SPRING EXTRA DUTY (EXTRA-HEAVY) SERIES《额外任务重型系列弹簧螺旋紧锁垫圈》.pdf