TCVN 1793-2009 Industrial glycerin Specifications《工业甘油 规范》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D4638-2003(2007) Standard Guide for Preparation of Biological Samples for Inorganic Chemical Analysis《无机化学分析用生物样品制备的标准指南》.pdf

ASTM D4638-2011 Standard Guide for Preparation of Biological Samples for Inorganic Chemical Analysis《无机化学分析用的生物样品制备的标准指南》.pdf

ASTM D4638-2016 Standard Guide for Preparation of Biological Samples for Inorganic Chemical Analysis《用于制备无机化学分析用生物样品的标准指南》.pdf

ASTM D4640-1986(2001) Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins《热固性酚醛树脂冲击固化时间的测定》.pdf

ASTM D4640-1986(2009) Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins《热固性酚醛树脂冲击固化时间的测定的标准试验方法》.pdf

ASTM D4640-1986(2017) Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins《测定热固性酚醛树脂冲击固化时间的标准试验方法》.pdf

ASTM D4641-1994(2006) Standard Practice for Calculation of Pore Size Distributions of Catalysts from Nitrogen Desorption Isotherms《由氮解吸等温线计算催化剂孔隙尺寸分布的标准实施规程》.pdf

ASTM D4641-2012 Standard Practice for Calculation of Pore Size Distributions of Catalysts and Catalyst Carriers from Nitrogen Desorption Isotherms《由氮解吸等温线计算催化剂及催化剂载体孔隙尺寸分布的标准实施规程》.pdf

ASTM D4641-2017 Standard Practice for Calculation of Pore Size Distributions of Catalysts and Catalyst Carriers from Nitrogen Desorption Isotherms《用氮脱附等温线计算催化剂和催化剂载体孔径分布的标准实施规程》.pdf