TCVN 2372-1987 Raw silk Method for determination of mean uniformity and minimum uniformity《生丝 平均均匀度和最小均匀度的测定方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AECMA PREN 4138-1994 Aerospace Series Screws Pan Head Offset Cruciform Recess Coarse Tolerance Normal Shank Medium Length Thread in Alloy Steel Cadmium Plated Classification 1 100 .pdf

AECMA PREN 4139-1993 Aerospace Series Screws Pan Head Offset Cruciform Recess Threaded to Head in Alloy Steel Cadmium Plated Classification 1 100 MPa (at Ambient Temperature) 235 D.pdf

AECMA PREN 4139-1994 Aerospace Series Screws Pan Head Offset Cruciform Recess Threaded to Head in Alloy Steel Cadmium Plated Classification 1 100 MPa (at Ambient Temperature) 235 D.pdf

AECMA PREN 4153-2009 Aerospace series Rivets solid universal head in aluminium alloy 2219 anodized or chromated metric series Edition P 1《航空航天系列.铝合金2219 万能头实心铆钉 阳极氧化或铬酸盐处理 公制系列.版本P.pdf

AECMA PREN 4154-2009 Aerospace series Rivet solid 100 degrees countersunk normal head in aluminium alloy 2219 anodized or chromated metric series Edition P1《航空航天系列.铝合金2219 100°标称埋头.pdf

AECMA PREN 4155-2009 Aerospace series Rivets solid 100 degrees countersunk normal head with dome in aluminium alloy 2219 anodized or chromated metric series Edition P 1《航空航天系列.铝合金2.pdf

AECMA PREN 4157-1996 Aerospace Series Rod Ends with Self-Aligning Double Row Ball Bearings and Threaded Shank in Steel Dimensions and Loads Inch Series Edition P 1《航空航天系列.杆末端自动校准双排.pdf

AECMA PREN 4158-2005 Aerospace series Paints and varnishes Test method for measurements of electrical surface resistance of conductive layers Edition P 1《航空航天系列.传导层测试电表层阻抗油漆试验方法.P1.pdf

AECMA PREN 4159-2005 Aerospace series Paints and varnishes Determination of resistance to microbial growth Edition P 1《航空航天系列.微生物增长油漆阻止.P1版》.pdf