TCVN 3831-1991 Bicycles Test methods《自行车 试验方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AECMA PREN 3307-1992 Aerospace Series Screws Pan Head Offset Cruciform Recess Threaded to Head in Titanium Alloy MoS2 Lubricated Classification 1100 MPa (at Ambient Temperature) 31.pdf

AECMA PREN 3308-1991 Aerospace Series Screws Normal Hexagonal Head Threaded to Head in Titanium Alloy MoS2 Lubricated Classification 1100 MPa (at Ambient Temperature) 315 Degrees C.pdf

AECMA PREN 3310-1995 Aerospace Series Titanium Alloy TI-P64001 not Heat Treated Grade 2 Forging Stock for Annealed Forgings a or D Less Than or Equal to 360 mm Edition P 2《航空航天系列.钛.pdf

AECMA PREN 3311-1994 Aerospace Series Titanium Alloy TI-P64001 Annealed Bar for Machining D Less Than or Equal to 150 mm Edition P 2《航空航天系列.钛合金 TI-P64001退火锻件用于制造直径D 小于或等于150 mm》.pdf

AECMA PREN 3312-1995 Aerospace Series Titanium Alloy TI-P64001 Grade 2 Annealed Forgings De Less Than or Equal to 150 mm Edition P 2《航空航天系列.钛合金 TI-P640012级退火锻件De小于或等于150 mm.P2版》.pdf

AECMA PREN 3313-1995 Aerospace Series Titanium Alloy TI-P64001 not Heat Treated Grade 2 Forging Stock for Solution Treated and Aged Forgings a or D Less Than or Equal to 360 mm Edi.pdf

AECMA PREN 3314-1994 Aerospace Series Titanium Alloy TI-P64001 Solution Treated and Aged Bar for Machining D Less Than or Equal to 75 mm Edition P 2《航空航天系列.钛合金TI-P64001 溶液处理和用于铸造的退.pdf

AECMA PREN 3315-1996 Aerospace Series Titanium Alloy TI-P64001 Solution Treated and Aged Forgings De Less Than or Equal to 75 mm Issue P 2《航空航天系列.钛合金TI-P64001溶液处理和用于铸造的退火棒材直径D小于或等于.pdf

AECMA PREN 3316-1995 Aerospace Series Titanium Alloy TI-P64 Annealed Rm Greater Than or Equal to 1070 MPa Sheet and Strip a Less Than or Equal to 6 mm Edition P 2 WITHDRAWN《航空航天系列..pdf