TCVN 5460-1991 Synthetic detergents Method for determination of apparent density《合成洗涤剂 表观密度的测定方法》.pdf

相关资源

JIS K3362-1998 合成洗涤剂的试验方法.pdf

JIS K3363-1990 合成洗涤剂生物降解度的试验方法.pdf

GB 3548-1983 合成洗涤剂工业污染物排放标准.pdf

GB 3548-1983 合成洗涤剂工业污染物排放标准.pdf

ASTM D3598-1989(2016) Standard Test Method for Citrate in Synthetic Detergents《合成洗涤剂中柠檬酸盐含量的标准试验方法》.pdf

GB T 18748-2002 表面活性剂和合成洗涤剂中活性组份分离的标准测定方法.pdf

ARMY P-D-410 C INT AMD 1-1983 DISHWASHING COMPOUND HAND (SYNTHETIC DETERGENT SOLID AND LIQUID FORM)《(固态和液态的合成洗涤剂)手洗组合》.pdf

ARMY P-D-410 C-1977 DISHWASHING COMPOUND HAND (SYNTHETIC DETERGENT SOLID AND LIQUID FORM)《(固态和液态的合成洗涤剂)手洗组合》.pdf

ASTM D820-1993(2003) Standard Test Methods for Chemical Analysis of Soaps Containing Synthetic Detergents《含合成洗涤剂肥皂的化学分析标准试验方法》.pdf

ASTM D820-1993(2009) Standard Test Methods for Chemical Analysis of Soaps Containing Synthetic Detergents《含合成洗涤剂肥皂的化学分析的标准试验方法》.pdf

猜你喜欢

ASTM F2132-2001 Standard Specification for Puncture Resistance of Materials Used in Containers for Discarded Medical Needles and Other Sharps《废弃医用针头和其它尖锐物用的容器使用的材料抗穿透性的标准规范》.pdf

ASTM F2132-2001(2008) Standard Specification for Puncture Resistance of Materials Used in Containers for Discarded Medical Needles and Other Sharps.pdf

ASTM F2135-2001(2007) Standard Specification for Molded Drain Waste and Vent (DWV) Short-Pattern Plastic Fittings《模制排水、污物和通风的短型塑料配件标准规范》.pdf

ASTM F2135-2001(2012) Standard Specification for Molded Drain Waste and Vent (DWV) Short-Pattern Plastic Fittings《模制排水 污物和通风的短型塑料配件的标准规格》.pdf

ASTM F2135-2001(2017) Standard Specification for Molded Drain Waste and Vent (DWV) Short-Pattern Plastic Fittings《模制排水 污物和通风的短型塑料配件标准规范》.pdf

ASTM F2135-2001(2017)e1 Standard Specification for Molded Drain Waste and Vent (DWV) Short-Pattern Plastic Fittings《模制排水 污物和通风的短型塑料配件标准规范》.pdf

ASTM F2136-2005 Standard Test Method for Notched Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe《测定HDPE树脂或HDPE.pdf

ASTM F2136-2008 Standard Test Method for Notched Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe《测定HDPE树脂或HDPE.pdf

ASTM F2136-2008(2015) Standard Test Method for Notched Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe《测定HDPE树.pdf