TCVN 5653-1992 Consumer packaging Plastic bags《消费者包装 塑料袋》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN 23878-1993 en Hardmetals - Vickers Hardness Test《硬质合金 维氏硬度试验(ISO 3878-1983)》.pdf

EN 23909-1993 en Hardmetals - Determination of Cobalt - Potentiometric Method《硬质合金 钴含量的测定 电位滴定法(ISO 3909-1976)》.pdf

EN 23923-2-1993 en Metallic Powders - Determination of Apparent Density - Part 2 Scott Volumeter Method《金属粉末 表观密度的测定 第2部分 斯科特(Scott)容积计法(ISO 3923-2-1981)》.pdf

EN 23964-1989 Dentistry Dental Handpieces Coupling Dimensions《牙科学 牙科手动器具 连接尺寸(ISO 3964-82)》.pdf

EN 23995-1993 en Metallic Powders - Determination of Green Strength by Transverse Rupture of Rectangular Compacts《金属粉末 用矩形压坯的横向断裂测定压坯强度(ISO 3995-1985)》.pdf

EN 24003-1993 en Permeable Sintered Metal Materials - Determination of Bubble Test Pore Size《可渗性烧结金属材料 气泡试验孔径的测定(ISO 4003-1977)》.pdf

EN 24006-1993 en Measurement of Fluid Flow in Closed Conduits - Vocabulary and Symbols《封闭管道内液体流量的测量 术语和符号(ISO 4006-1991)》.pdf

EN 24015-1991 en Hexagon Head Bolts - Product Grade B - Reduced Shank (Shank Diameter = Pitch Diameter)《六角头螺栓 B级产品 缩杆(杆径近似中径)(ISO 4015-79)》.pdf

EN 24159-1989 en Determination of Manganese Content Potentiometric Method《锰铁和硅锰铁中锰含量的测定 电势滴定法(ISO 4159-78)》.pdf