TCVN 6663-14-2000 Water quality Sampling Part 14 Guidance on quality assurance of environmental water sampling and handling《水质 取样 第14部分 环境水样采集和处理过程质量保证指南》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CSN 01 4955-1978 Involute splines with pressure angle 30φ Nominal dimensions and measured quantities《30压力角；标称尺寸渐开线花键》.pdf

CSN 01 4960-1974 Recesses《凹槽》.pdf

CSN 01 4975-1956 Grinding allowances《附加物的磨削》.pdf

CSN 01 4990-1987 Cylindrical shaft ends《圆柱轴端》.pdf

CSN 01 4992-1974 Conical shaft ends with the conity 1 10 Basic dimensions《带锥度1的圆锥轴端1：10 基本尺寸》.pdf

CSN 01 5008-1986 Non-destructive testing by magnetic leakage flux method Glossary of terms《漏磁法进行无损检测 术语表》.pdf

CSN 01 5016 Z1-1998 《非破坏性试验测试材料和产品方法》.pdf

CSN 01 5016 Z2-1999 《非破坏性测试-材料和产品测试方法》.pdf

CSN 01 5016-1986 Non-destructive testing Penetrant flaw delection《无损测试 渗透探伤检查》.pdf