TCVN 6700-5-2011 Approval testing of welders Fusion welding Part 5 Titanium and titanium alloys zirconium and zirconium alloys《焊工认证试验 熔焊 第5部分 钛和钛合金 锆和锆合金》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

JUS M B0 540-1983 Plug gauges GO and NOT GO forminordiameterofinternalscrawthraads forM1fi-€Htoinclu~ ding M 100-6H《内部螺纹小直径过端及不过端塞规 M1fi-€H 到 M 100-6H（包括M 100-6H）》.pdf

JUS M B0 600-1985 Taps for ISO metric threads Tolerances on the threadedportion《ISO公制螺纹用水龙头 螺纹部分的公差》.pdf

JUS M B1 003-1987 Metric threads Drill diameters for use to tapping screvvs《公制螺纹 用于锥形螺纹的钻头直径》.pdf

JUS M B1 005-1979 External metric threads with triangular ISO-proflle Runoutsand undercuts《带三角形ISO 剖面的公制外螺纹 收尾和间距》.pdf

JUS M B1 006-1979 Internat metric threads with triangular ISO-profile Runouts and undercuts《带三角形ISO-剖面的国际公制内螺纹 收尾和间距》.pdf

JUS M B1 013-1990 Hexagon bolts and screvvs and nuts《六角形螺栓、螺丝和螺母》.pdf

JUS M B1 014-1983 Tapping screvvs Application and ore holes《锥形螺丝 应用及钻孔》.pdf

JUS M B1 016-1989 Fluid power systems and components Screvved plugs and taped holeswith ISO-metric pipe thread fine Constructional dimensions《液压驱动系统和部件 带有ISO公制管螺纹的螺旋塞和锥形孔 构造尺寸》.pdf

JUS M B1 023-1983 Bolts screvvs and studs with prescribed quality Technical requirements《要求质量的螺栓，螺丝及螺母 技术要求》.pdf