1、 B U I L D I N G G L O B A L C O M M U N I C A T I O N S July 12, 2002 SUBJECT: Standards Proposal No. 3-4384-RV5, Proposed Revision ofTIA/EIA-97-E “Recommended Minimum Performance Standards for cdma2000 Spread Spectrum Base Stations” (if approved, to be published as TIA/EIA-97-E) BACKGROUND: The at
2、tached material was prepared by the TIA TR-45.5 Subcommittee on Spread Spectrum Digital Technology, and was approved by the Chairman of the Committee. SP-3-4384-RV5 is herewith submitted to TIA membership and others concerned as a step toward standardization. NOTE: On publication of TIA/EIA-97-E as
3、an ANSI approved standard, TIA/EIA 97-D will be withdrawn unless comments are received indicating a need to retain it. Such comments must indicate the reason retention should be considered by the committee. Unless comments to consider retention are received, TIA/EIA-97-D will be withdrawn by the Sta
4、ndards Secretariat of TIA on publication of TIA/EIA-97-E. Please use the following format for comments: Company Name - Comment No. Type of Comment - Technical or Editorial Reference - Page No., Clause No., Line Suggested Change - Change From:. To:. Add:, Delete: Rationale for Technical Change COMMEN
5、T PERIOD EXPIRES: SEPTEMBER 12, 2002 2500 Wilson BoulevardSuite 300Arlington, VA 22201-3834USA+1.703.907.7700FAX +1.703.907.7727The Telecommunications Industry Association represents the communications sector ofPrior to this date, comments may be submitted for consideration as noted on page two of t
6、his form. Following the expiration of the comment period, and consideration by the relevant committee, this Proposal will be submitted to the TIA Technical Standards Subcommittee (TSSC) for final approval as to acceptance or rejection of this Standards Proposal. Eng # 61525Copyright Telecommunicatio
7、ns Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-PLEASE FILL OUT AND SIGN THIS FORM AND RETURN IT WITH ANY COMMENTS TO: Billie Zidek-Conner SUBJECT: Standards Proposal No. 3-4384-RV5, Telecommunications I
8、ndustry Assoc. Proposed Revision of TIA/EIA-97-E 2500 Wilson Blvd., Suite 300 “Recommended Minimum Performance Standards Arlington, VA 22201-3834 for cdma2000 Spread Spectrum Base Stations” (if (FAX: 703/907-7728) approved, to be published as TIA/EIA-97-E) COMMENT PERIOD EXPIRES: SEPTEMBER 12, 2002
9、USER PRODUCER GENERAL INTEREST Please circle one only to indicate the most accurate description of the relevance of this Standards Proposal to your company. This information is required by ANSI to process your comments. DATE:_ NAME:_ Please Print TEL:_ NAME:_ Signature E-MAIL_ COMPANY:_ _ ADDRESS:_
10、_-page 2-Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE This document is a TIA/EIA Engineering Standards Proposal, rather than an interim or final Standard. It is publis
11、hed for purposes of comment and is subject to further review and modification by the TIA Technical Standards Subcommittee (TSSC), which may accept or reject the Standards Proposal. Accordingly, readers of this Standards Proposal are cautioned against relying on information contained therein prior to
12、 the adoption of a final standard. TIA/EIA disclaims any liability or responsibility for the consequences of such reliance. Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION 2002 2500 Wilson Boulevard Arlington, VA 22201 All rights reserved Printed in U.S.A. PRICE: $165.00Copyright Telecommunicat
13、ions Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without lic
14、ense from IHS-,-,-TR45.5 China Meeting TR45.5/02.06.14._ 10-14 June 2002 TITLE: Proposed Ballot Version of the Base Station Perf Standard (TIA/EIA-97-E) ABSTRACT: This document presents the proposed ballot version of TIA/EIA-97-E. Source: Jason Losh Chair TR45.5 WG-III c/o Motorola Inc. Cellular Inf
15、rastructure Group 5555 N. Beach St. Ft. Worth, TX 76137-2794 Tel: (817) 245-6495 Fax: (817) 245-6622 e-mail: Distribution to: TR45.5 Recommendation: Approve. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted
16、 without license from IHS-,-,-Recommended Minimum Performance Standards for cdma2000 Spread Spectrum Base Stations TIA/EIA-97-E Ballot Version June 14, 2002 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted w
17、ithout license from IHS-,-,-Copyright 2002 TIA. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Copyright Telecommunications Industry Association Provided by IHS under license w
18、ith EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Ballot Version SP-3-4384-RV5 CONTENTS i NOTES xv 1 NORMATIVE REFERENCES. xvii 2 1 INTRODUCTION 1-1 3 1.1 Scope 1-1 4 1.2 Terms and Definitions1-1 5 1.3 Test Modes 1-9 6 1.4 Base Station Repeaters 1-10 7 2 STAND
19、ARD EMISSIONS MEASUREMENT PROCEDURES.2-1 8 2.1 Radiated Emissions Measurement2-1 9 2.1.1 Standard Radiation Test Site 2-1 10 2.1.2 Search Antenna .2-1 11 2.1.3 Field-Strength Measurement 2-2 12 2.1.4 Frequency Range of Measurements.2-2 13 2.1.5 Test Ranges .2-2 14 2.1.5.1 30-Meter Test Range.2-2 15
20、2.1.5.2 3-Meter Test Range.2-3 16 2.1.6 Radiated Signal Measurement Procedures.2-3 17 2.2 AC Power Line Conducted Emissions Measurement 2-4 18 2.2.1 Standard AC Power Line Conducted Emissions Test Site .2-4 19 2.2.2 Line Impedance Stabilization Network (LISN) Unit.2-4 20 2.2.3 Standard Test Site Mea
21、surements 2-5 21 2.2.3.1 Floor Standing Equipment 2-5 22 2.2.3.2 Table Top Mounted Equipment .2-5 23 2.2.3.3 Measurement Procedure .2-5 24 2.2.3.4 Frequency Range of Measurements .2-5 25 2.2.4 End User or Manufacturing Plant Test Sites2-5 26 3 CDMA RECEIVER MINIMUM STANDARDS.3-1 27 3.1 Frequency Cov
22、erage Requirements .3-1 28 3.1.1 Band Class 0 (800 MHz Band) 3-1 29 3.1.2 Band Class 1 (1900 MHz Band) 3-4 30 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Ballot Version SP-3
23、-4384-RV5 CONTENTS ii 3.1.3 Band Class 2 (TACS Band). 3-7 1 3.1.4 Band Class 3 (JTACS Band) . 3-10 2 3.1.5 Band Class 4 (Korean PCS Band) . 3-11 3 3.1.6 Band Class 5 (450 MHz Band) 3-13 4 3.1.7 Band Class 6 (2 GHz Band) 3-16 5 3.1.8 Band Class 7 (700 MHz Band) 3-17 6 3.1.9 Band Class 8 (1800 MHz Ban
24、d) 3-19 7 3.1.10 Band Class 9 (900 MHz Band) 3-21 8 3.1.11 Band Class 10 (Secondary 800 MHz Band) . 3-22 9 3.1.12 Band Class 11 (400 MHz European PAMR Band) 3-25 10 3.1.13 Band Class 12 (800 MHz PAMR Band) 3-27 11 3.2 Access Probe Acquisition . 3-29 12 3.2.1 Definition 3-29 13 3.2.2 Method of Measur
25、ement. 3-29 14 3.2.2.1 Access Channel Probe Acquisition 3-29 15 3.2.2.2 Enhanced Access Channel Probe Acquisition 3-30 16 3.2.3 Minimum Standard 3-32 17 3.3 Reverse Common Control Channel Demodulation Performance. 3-32 18 3.3.1 Performance in Additive White Gaussian Noise . 3-32 19 3.3.1.1 Definitio
26、n. 3-32 20 3.3.1.2 Method of Measurement. 3-32 21 3.3.1.3 Minimum Standard 3-34 22 3.3.2 Performance in Multipath Fading with Closed Loop Power Control 3-35 23 3.3.2.1 Definition. 3-35 24 3.3.2.2 Method of Measurement. 3-35 25 3.3.2.3 Minimum Standard 3-37 26 3.4 Reverse Traffic Channel Demodulation
27、 Performance. 3-37 27 3.4.1 Performance in Additive White Gaussian Noise . 3-37 28 3.4.1.1 Definition. 3-37 29 3.4.1.2 Method of Measurement. 3-37 30 3.4.1.3 Minimum Standard 3-38 31 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction
28、 or networking permitted without license from IHS-,-,-Ballot Version SP-3-4384-RV5 CONTENTS iii 3.4.2 Performance in Multipath Fading without Closed Loop Power Control3-39 1 3.4.2.1 Definition .3-39 2 3.4.2.2 Method of Measurement .3-39 3 3.4.2.3 Minimum Standard 3-40 4 3.4.3 Performance in Multipat
29、h Fading with Closed Loop Power Control.3-40 5 3.4.3.1 Definition .3-40 6 3.4.3.2 Method of Measurement .3-40 7 3.4.3.3 Minimum Standard 3-42 8 3.5 Receiver Performance.3-42 9 3.5.1 Receiver Sensitivity 3-42 10 3.5.1.1 Definition .3-42 11 3.5.1.2 Method of Measurement .3-42 12 3.5.1.3 Minimum Standa
30、rd 3-43 13 3.5.2 Receiver Dynamic Range 3-43 14 3.5.2.1 Definition .3-43 15 3.5.2.2 Method of Measurement .3-43 16 3.5.2.3 Minimum Standard 3-44 17 3.5.3 Single Tone Desensitization 3-44 18 3.5.3.1 Definition .3-44 19 3.5.3.2 Method of Measurement .3-44 20 3.5.3.3 Minimum Standard 3-46 21 3.5.4 Inte
31、rmodulation Spurious Response Attenuation 3-46 22 3.5.4.1 Definition .3-46 23 3.5.4.2 Method of Measurement .3-46 24 3.5.4.3 Minimum Standard 3-47 25 3.5.5 Adjacent Channel Selectivity.3-47 26 3.5.5.1 Definition .3-47 27 3.5.5.2 Method of Measurement .3-47 28 3.5.5.3 Minimum Standard 3-48 29 3.5.6 R
32、eceiver Blocking.3-48 30 3.5.6.1 Definition .3-48 31 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Ballot Version SP-3-4384-RV5 CONTENTS iv 3.5.6.2 Method of Measurement. 3-48
33、 1 3.5.6.3 Minimum Standard 3-49 2 3.6 Limitations on Emissions. 3-50 3 3.6.1 Conducted Spurious Emissions 3-50 4 3.6.1.1 Definition. 3-50 5 3.6.1.2 Method of Measurement. 3-50 6 3.6.1.3 Minimum Standard 3-50 7 3.6.2 Radiated Spurious Emissions. 3-51 8 3.7 Received Signal Quality Indicator (RSQI) 3-
34、51 9 3.7.1 Definition 3-51 10 3.7.2 Method of Measurement. 3-52 11 3.7.3 Minimum Standard 3-53 12 4 CDMA TRANSMITTER MINIMUM STANDARDS 4-1 13 4.1 Frequency Requirements . 4-1 14 4.1.1 Frequency Coverage. 4-1 15 4.1.2 Frequency Tolerance 4-1 16 4.1.2.1 Definition. 4-1 17 4.1.2.2 Method of Measurement
35、. 4-1 18 4.1.2.3 Minimum Standard 4-1 19 4.2 Modulation Requirements 4-1 20 4.2.1 Synchronization and Timing. 4-2 21 4.2.1.1 Pilot Time Tolerance. 4-2 22 4.2.1.1.1 Definition. 4-2 23 4.2.1.1.2 Method of Measurement . 4-2 24 4.2.1.1.3 Minimum Standard 4-2 25 4.2.1.2 Pilot Channel to Code Channel Time
36、 Tolerance . 4-3 26 4.2.1.2.1 Definition. 4-3 27 4.2.1.2.2 Method of Measurement . 4-3 28 4.2.1.2.3 Minimum Standard 4-3 29 4.2.1.3 Pilot Channel to Code Channel Phase Tolerance 4-4 30 4.2.1.3.1 Definition. 4-4 31 Copyright Telecommunications Industry Association Provided by IHS under license with E
37、IANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Ballot Version SP-3-4384-RV5 CONTENTS v 4.2.1.3.2 Method of Measurement4-4 1 4.2.1.3.3 Minimum Standard.4-4 2 4.2.2 Waveform Quality.4-4 3 4.2.2.1 Definition .4-4 4 4.2.2.2 Method of Measurement .4-4 5 4.2.2.3 Minim
38、um Standard 4-5 6 4.2.3 Forward Power Control Subchannel4-5 7 4.2.3.1 Definition .4-5 8 4.2.3.2 Method of Measurement .4-5 9 4.2.3.3 Minimum Standard 4-8 10 4.3 RF Output Power Requirements .4-8 11 4.3.1 Total Power 4-8 12 4.3.1.1 Definition .4-8 13 4.3.1.2 Method of Measurement .4-8 14 4.3.1.3 Mini
39、mum Standard 4-8 15 4.3.2 Pilot Power.4-9 16 4.3.2.1 Definition .4-9 17 4.3.2.2 Method of Measurement .4-9 18 4.3.2.3 Minimum Standard 4-9 19 4.3.3 Code Domain Power .4-9 20 4.3.3.1 Definition .4-9 21 4.3.3.2 Method of Measurement .4-9 22 4.3.3.3 Minimum Standard 4-10 23 4.4 Limitations on Emissions
40、.4-10 24 4.4.1 Conducted Spurious Emissions 4-10 25 4.4.1.1 Definition .4-10 26 4.4.1.2 Method of Measurement .4-10 27 4.4.1.3 Minimum Standard 4-11 28 4.4.2 Radiated Spurious Emissions .4-15 29 4.4.3 Inter-Base Station Transmitter Intermodulation4-15 30 4.4.3.1 Definition .4-15 31 Copyright Telecom
41、munications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Ballot Version SP-3-4384-RV5 CONTENTS vi 4.4.3.2 Method of Measurement 4-15 1 4.4.3.3 Minimum Standard 4-16 2 4.4.4 Occupied Bandwidth 4-16 3 4.4.
42、1.1 Definition. 4-16 4 4.4.1.2 Method of Measurement. 4-16 5 4.4.1.3 Minimum Standard 4-16 6 4.4.5 Repeater Out of Band Gain 4-16 7 4.4.5.1 Definition. 4-16 8 4.4.5.2 Method of Measurement. 4-16 9 4.4.5.3 Minimum Standard 4-17 10 5 CDMA GENERAL REQUIREMENTS . 5-1 11 5.1 Temperature and Power Supply
43、Voltage . 5-1 12 5.1.1 Definition 5-1 13 5.1.2 Method of Measurement. 5-1 14 5.1.3 Minimum Standard 5-1 15 5.2 High Humidity. 5-2 16 5.2.1 Definition 5-2 17 5.2.2 Method of Measurement. 5-2 18 5.2.3 Minimum Standard 5-2 19 5.3 AC Power Line Conducted Emissions . 5-2 20 5.3.1 Definition 5-2 21 5.3.2
44、Method of Measurement. 5-2 22 5.3.3 Minimum Standard 5-3 23 6 CDMA STANDARD TEST CONDITIONS 6-1 24 6.1 Standard Equipment . 6-1 25 6.1.1 Basic Equipment . 6-1 26 6.1.2 Associated Equipment 6-1 27 6.2 Standard Environmental Test Conditions. 6-1 28 6.3 Standard Conditions for the Primary Power Supply
45、6-1 29 6.3.1 General . 6-1 30 6.3.2 Standard DC Test Voltage from Accumulator Batteries . 6-1 31 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Ballot Version SP-3-4384-RV5 CON
46、TENTS vii 6.3.3 Standard AC Voltage and Frequency.6-2 1 6.4 Standard Test Equipment 6-2 2 6.4.1 Channel Simulator.6-2 3 6.4.2 Waveform Quality Measurement Equipment .6-5 4 6.4.2.1 Rho Meter 6-5 5 6.4.2.2 Code Domain Measurement Equipment.6-7 6 6.4.3 Mobile Station Simulator6-9 7 6.4.4 AWGN Generator
47、6-9 8 6.4.5 CW Generator 6-10 9 6.4.6 Spectrum Analyzer.6-10 10 6.4.7 Average Power Meter 6-11 11 6.4.8 RF Output Load .6-12 12 6.5 Test Setups6-12 13 6.5.1 Functional System Setups6-12 14 6.5.2 Test Model for Base Station 6-17 15 6.5.3 General Comments.6-19 16 6.6 Standard Duty Cycle6-19 17 6.7 Fra
48、me Error Rate Measurement .6-19 18 6.8 Confidence Limits 6-20 19 ANNEX A PERFORMANCE REQUIREMENTS1 20 A.1 Access Channel and Enhanced Access Channel Performance.1 21 A.2 Reverse Common Control Channel Performance 3 22 A.2.1 AWGN Performance Requirements.3 23 A.2.2 Fading Channel Performance Requirements.3 24 A.3 Reverse Traffic Channel Performance 8
