1、 TSB-102.CBBK-A March 2010 Project 25 Recommended Compliance Assessment Tests - Trunking ISSI NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and im
2、provement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not
3、 conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Ins
4、titute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regu
5、latory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Standards Proposal No. 3-0378-RV1-1, formulated under the cognizance of the TIA, TR-8 Mob
6、ile and Personal Private Radio Standards. TR-8.25 Subcommittee onCompliance Assessment). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY
7、 ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call IHS USA and Canada (1-800-525-7052 ) International (303-790-0600) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction
8、 of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to
9、request permission. Details are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright OR Telecommunications Industry Association Standards (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) t
10、he Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA mak
11、es no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any ob
12、ligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasona
13、ble or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“
14、other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i)
15、 TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published
16、pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with th
17、e contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING TH
18、E ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS
19、 OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES
20、, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF
21、 CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH
22、LIMITATIONS. TSB-102.CBBK-A i Foreword (This foreword is not part of this bulletin.) This document has been submitted to APCO/NASTD/FED by the Telecommunications Industry Association (TIA), as provided for in a Memorandum of Understanding (MOU) dated December 1993. That MOU provides that APCO/NASTD/
23、FED will devise a Common System Standard for digital public safety communications (the Standard), and that TIA shall provide technical assistance in the development of documentation for the Standard. This document has been developed with inputs from the APCO/TIA Project 25 Interface Committee (APIC)
24、, the APIC Inter-RF SubSystem Interface (ISSI) Task Group, and TIA Industry members. This document is being published because it is felt that there is an urgent need for technical information on the emerging digital techniques for Land Mobile Radio Service. This document describes a subset of tests
25、appropriate for P25 Compliance Assessment testing associated with ISSI Trunking Voice and Mobility Services (also known as ISSI Scope 1). As other documents associated with P25 Compliance Assessment are developed, this document will be subject to change. P25 Compliance Assessment uses a subset of pu
26、blished standard tests to “assess” compliance and is not intended to imply an exhaustive standard compliance verification. Standardized ISSI tests are identified here and can be found in the references of this document. TSB-102.CBBK-A ii Table of Contents 1 INTRODUCTION 1 1.1 Scope 2 1.2 Revision Hi
27、story 3 1.3 Informative References 3 2 TESTS 4 TSB-102.CBBK-A iii List of Tables TABLE 1 - REVISION HISTORY 3 TABLE 2 - TRUNKING ISSI COMPLIANCE ASSESSMENT (INTEROPERABILITY) TESTS 4 TSB-102.CBBK-A iv TSB-102.CBBK-A 1 1 Introduction The purpose of this Telecommunications Systems Bulletin is to ident
28、ify the subset of tests appropriate for P25 Compliance Assessment testing of systems connected using P25 ISSI equipment, i.e. infrastructure for Trunking ISSI services. The ISSI is a standard option and might not be provided by a manufacturer. P25 Compliance Assessment intends to demonstrate that th
29、e equipment from different manufacturers will interoperate with respect to P25 defined features, services and interfaces. P25 Compliance Assessment uses a subset of published standard tests to “assess” compliance and is not intended to imply an exhaustive standard compliance verification. The full s
30、et of ISSI interoperability, conformance and performance tests published by TIA for P25 may be found in reference 1, 2 and 3 respectively. The full set of ISSI interoperability, conformance and performance tests are expected to be part of the manufacturers product design, product implementation and
31、product certification process. The “product certification process” referred to here is a manufacturer-specific process, part of the product development process, and does not imply formal certification by any entity such as the FCC, etc. This document does not substitute or override any of the tests
32、in reference 1, 2, or 3. This document identifies a subset of the full set of tests in reference 1 appropriate for P25 Compliance Assessment testing of systems connected using P25 ISSI equipment, i.e. infrastructure for Trunking ISSI Services. This document was drafted within the APCO/TIA Project 25
33、 Interface Committee (APIC), ISSI Task Group (ISSITG), and represents the consensus achieved within the ISSITG once the comment review period was concluded. The draft was subsequently updated to reflect the ISSITG agreements in preparation for transferal to TR8.25 and eventual publication. TSB-102.C
34、BBK-A 2 1.1 Scope This Bulletin identifies the tests that Trunking equipment is expected to pass in order for a manufacturer to declare P25 Compliance in the area of Trunking ISSI for Voice and Mobility Services. These tests were deemed necessary by the industry and user members participating in the
35、 work of the ISSI TG and TR8.25. The ISSITG includes TIA members and representatives of Federal, State and Local Public Safety agencies and organizations. This group, being familiar with the relevant published standards, available P25 equipment and test equipment and the general intentions of P25 Co
36、mpliance Assessment, reviewed all trunking ISSI interoperability tests described in reference 1. P25 Compliance Assessment confirms that the equipment of different manufacturers will interoperate with respect to the P25 defined features, services and interfaces. In determining the tests appropriate
37、for P25 Compliance Assessment testing in this area, the group considered whether tests in reference 1were important for achieving interoperability between equipment of different manufacturers versus tests important for product design and certification. In general, tests that were determined to be mo
38、re oriented towards product design and certification were deemed unnecessary for inclusion in this list. As explained previously, the “product certification” referred to here is a manufacturer-specific process, part of the product development process, and does not imply formal certification by any e
39、ntity such as the FCC, etc. The resulting list therefore represents tests that are most important for or most likely to impact interoperability between manufacturers building to the same set of published standard documents. TSB-102.CBBK-A 3 1.2 Revision History Table 1 - Revision History Version Dat
40、e Description Rev A April 2009 First draft submitted to ISSI TG. Rev B May 2009 Second draft, updates made based on comment resolution during May 14 ISSI TG teleconference. Rev B Draft 2 June 2009 Editorial revision to Rev B based on comment resolution during June 4 ISSI TG teleconference. This vers
41、ion for TR8.25 consideration. Rev C July 2009 Added the new test cases defined in Rev J of the ISSI Interoperability Test Procedure. Rev D August 2009 In ISSI TG updated Rev C based on comment resolutions in 09-152-R1. Distributed as Rev D for consideration by ISSI TG for approval and transmittal to
42、 APIC and TR8 during its meeting in Las Vegas on August 12. Rev E September 2009 Updated to remove 6 test cases that were removed from the proposed revision of ISSI Interoperability, comment resolutions found in TR8.19/09-099-R4. The test cases were removed because TIA-102.BACA-A needs clarification
43、 as to the expected behavior. Rev F November 2009 Updated to remove test cases 2.3.8.5.6, 2.3.8.5.7, 2.3.8.5.8 and 2.3.8.5.9 based on ballot comments from EADS and Motorola. Also, the 4 test cases were removed from the proposed revision of ISSI Interoperability Test Procedure TIA-102.CACD-A, TR8.19
44、ballot comment resolutions found in TR8.19/09-115-R1. Rev G February 2010 Prepared document for publication. Removed Draft watermark, removed extraneous comma on page 4 per editorial ballot comment. Fixed the front matter page numbering and moved Table captures to the top of the table meet the Style
45、 Guide requirements. 1.3 Informative References 1 Rev N of ISSI Interoperability Test Procedures for Trunked Voice and Mobility Services under development in ISSI TG, if approved by TIA to be published as TIA-102.CACD-A. 2 TIA-102.CACC ISSI Conformance Test Procedures 3 TIA-102.CACB ISSI Performance
46、 Recommendations for Voice Services TSB-102.CBBK-A 4 2 Tests The ISSITG has identified the following tests after review of reference 1. This table defines the subset of tests for demonstrating P25 Compliance. Each test is listed referencing its corresponding test from 1. Table 2 - Trunking ISSI Comp
47、liance Assessment (Interoperability) Tests Trunking ISSI Interoperability Tests for Voice and Mobility Services Test from 1 Full registration 2.3.1 Valid registration1 2.3.1.5.1 Denied or refused registration1 2.3.1.5.2 Successful SU Home Query with Force parameter enabled1 2.3.1.5.3 Successful SU H
48、ome Query with Confirm parameter enabled1 2.3.1.5.4 Successful SU De-registration1 2.3.1.5.5 SU Roamed Procedure1 2.3.1.5.6 Group voice call 2.3.2 Group call granted Unconfirmed All units roaming1 2.3.2.5.1 Group call granted Unconfirmed No units roaming1 2.3.2.5.2 Group call granted Confirmed All u
49、nits roaming1 2.3.2.5.3 Group call granted Confirmed No units roaming1 2.3.2.5.4 Confirmed group call granted after RF Resources become available - all units roaming1 2.3.2.5.5 Confirmed group call granted after RF Resources become available No units roaming1 2.3.2.5.6 Group call denied1 2.3.2.5.7 Heartbeat verification - group call granted unconfirmed all units roaming1 2.3.2.5.8 Heartbeat verification - group call granted Unconfirmed no units roaming1 2.3.2.5.9 Group call granted unconfirmed all units roaming home RFSS in
