1、TIA TELECOMMUNICATIONS SYSTEMS BULLETIN Cellular Digital Packet Data System Specification - Part 1 O 14 Application-Entity Look-up Directory Profile TSB-87-1014 Reaffirmed August 9,2002 ODECEMBER 1997 TELECOMMUNICATIONS INDUSTRY ASSOCIATION The Teleconmiunications Industry Association represents the
2、 conmiunications sector of NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and
3、 obtaining with minimum delay the proper product for his particular need. Existence of such Standards and Publications shall not in any respect preclude any member or nonmember of TIA from manufacturing or selling products not conforming to such Standards and Publications, nor shall the existence of
4、 such Standards and Publications preclude their voluntary use by those other than TIA members, whether the standard is to be used either domestically or internationally. Standards, Publications and Bulletins are adopted by TIA in accordance with the American National Standards Institute (ANSI) paten
5、t policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard, Publication, or Bulletin. Technical Bulletins are distinguished from TIA Standards or Documents, in that they contain a compilation of enginee
6、ring data or information useful to the technical community, and represent approaches to good engineering practices that are suggested by the formulating committee. This Bulletin is not intended to preclude or discourage other approaches that similarly represent good engineering practice, or that may
7、 be acceptable to, or have been accepted by, appropriate bodies. Parties who wish to bring other approaches to the attention of the formulating committee to be considered for inclusion in future revisions of this Bulletin are encouraged to do so. It is the intention of the formulating committee to r
8、eview this document every five years, but it maybe revised and updated at any time as may be occasioned by changes in technology, industry practice, or government regulations, or for other appropriate reasons. (From Project No. 3-4005, formulated under the cognizance of the TIA TR-45.6 Subcommittee
9、on Adjunct Wireless Packet Data Technology.) This Document was reaffirmed by the Telecommunications Industry Association on August 9,2002. Published by OTELECOMMUNICATIONS INDUSTRY ASSOCIATION 1997 Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: Please ref
10、er to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call Global Engineering Documents, USA and Canada (1 -800-854-7 179) International (303-397-7956) or search online at http:/www.tiaonline.org/standards/search-n-order .ch All rights reserve
11、d Printed in U.S.A. NOTICE OF DISCLAIMER AND LIMITATION OF LIABILITY The document to which this Notice is affixed has been prepared by one or more Engineering Committees of the Telecommunications Industry Association (“TIA”). TIA is not the author of the document contents, but publishes and claims c
12、opyright to the document pursuant to licenses and permission granted by the authors of the contents. TIA Engineering Committees are expected to conduct their affairs in accordance with the TIA Engineering Manual (“Manual”), the current and predecessor versions of which are available at http:/www.tia
13、online.orZr/standards/sfZr/engineering manual.ch. TIAS function is to administer the process, but not the content, of document preparation in accordance with the Manual and, when appropriate, the policies and procedures of the American National Standards Institute (“ANSI”). THE USE OR PRACTICE OF CO
14、NTENTS OF THIS DOCUMENT MAY INVOLVE THE USE OF INTELLECTUAL PROPERTY RIGHTS (“IPR), INCLUDING PENDING OR ISSUED PATENTS, OR COPYRIGHTS, OWNED BY ONE OR MORE PARTIES. TIA MAKES NO SEARCH OR INVESTIGATION FOR IPR. WHEN IPR CONSISTING OF PATENTS AND PUBLISHED PATENT APPLICATIONS ARE CLAIMED AND CALLED
15、TO TIAS ATTENTION, A STATEMENT FROM THE HOLDER THEREOF IS REQUESTED, ALL IN ACCORDANCE WITH THE MANUAL. TIA TAKES NO POSITION WITH REFERENCE TO, AND DISCLAIMS ANY OBLIGATION TO INVESTIGATE OR INQUIRE INTO, THE SCOPE OR VALIDITY OF ANY CLAIMS OF IPR. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED
16、, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FORA PARTICULAR PURPOSE PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIO
17、NS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION. OR USE, ITS MERCHANTABILITY AND ITS NON-INFRINGEMENT OF ANY THIRD TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HER
18、EIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERW
19、ISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIAIEIA TELECOMMUNICATIONS SYSTEMS BULLETIN I I Cellular Digital Packet Da
20、ta System Specification - Part 1014 Application-Entity Look-up Directory Profile I TSB87-1014 DECEMBER 1W TELECOMMUNICATIONS INDUSTRY ASSOCIATION NOTICE ?IA/EA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers
21、 and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for his particular need. Existence of such Standards and Publications shall not in any respect preclude any member or nonmember o
22、f WEIA from manufacturing or selling products not conforming to such Standards and Publications, nor shall the existence of such Standards and Publications preclude their voluntary use by those other than TiAEIA members, whether the standard is to be used either domestically or internationally. Stan
23、dards, Publications and Buletins are adopted by EIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA/EIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Sandard, Publication, o
24、r Bulletin. Technical Bulletins are distinguished from TIAIEM Standards or Interim Standards, in that they contain a compilation of engineering data or information useful to the technical community, and represent approaches to good engineering practices that are suggested by the formulating committe
25、e. This Bulletin is not intended to preclude or discourage other approaches that similarly represent good engineering practice, or that may be acceptable to, or have been accepted by, appropriate bodies. Parties who wish to bring other approaches to the attention of the formulating committee to be c
26、onsidered for inclusion in future revisions of this Bulletin are encouraged to do so. It is the intention of the formulating committee to revise and update this Bulletin from time to time as may be occasioned by changes in technology, industry practim, or govemment regulations, or for other appropri
27、ate reasons. (From Project No. 4005, formulated under the cognizance of the TIA TR-45.6 Adjunct Wireless Packet Data Standards Subcommittee) Published by FELECOMMUNICATIONS INDUSTRY ASSOCIATION 1997 Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 . PRICE: Please refer t
28、o the current Catalog of EIA, JEDEC and TIA STANDARDS and ENGI“G PUBLICATIONS International (303-397-7956) or call Global Engineering Documents, USA and Canada (1-800-854-7179) AU rights reserved Printed in U.S.A. PART 1014 Table of Contents O Foreword 1014-iii 0.1 Document Structure . i014-iii . 1
29、Introduction 1014-1 2 Required Directory Services . 1014-2 3 Directory Information 1014-2 3.1 Other Profiles Supported . 1014-2 3.2 Standard Application Specific Attributes and Attribute Sets . 1014-3 3.3 Standard Application Specific Object Classes . 1014-3 3.4 Non-Standard Application Specific Att
30、ributes and Attribute Sets . 1 0 14-3 3.5 Non-Standard Application Specific Object Classes 1014-4 3.6 3.6.1 Naming Attributes . 1014-4 3.6.2 Structure Rules 1014-4 Name Forms and Directory Information Tree (DIT) Structures . 1014-4 . 1 o1 4-i TIAEIAKCB-87-1 O1 4 Foreword - PART 1014 Application-Enti
31、ty Look-up Directory Profile O Foreword o. 1 This foreword is not part of this Telecommunications Systems Bulletin. This Telecommunications Systems Bulletin has been developed by Subcommittee TR-45.6, and contains information which may be useful to implementors of systems compliant with TSB-87, “Cel
32、lular Digital Packet Data System Specification,” or its derivatives. This document contains significant portions of material originally submitted by the Cellular Digital Packet Data Forum Inc. CDPD is a technology intended to provide packet data networking services to mobile hosts. The media used to
33、 provide these services consists of radio channels typically used for Advanced Mobile Phone System (AMPS) cellular service. Document Structure This Telecommunications Systems Bulletin is published as a series of Parts. Each Part contains information pertaining to one aspect of the system. The functi
34、onal structure of this TSB is as follows: o Part 1000 to Part 1999-Guidelines for Service Providers These Parts are informative and discuss non-CDPD specific entities (such as Intermediate Systems), support services (such as directory - 1014iii Previous page is blank TWEIAKSB-87-1014 Application-Ent
35、ity Look-up Directory Profile services, accounting: summary and settiement procedures, authentication, etc.), value-added services (such as subscriber location) and Service Provider issues (such as an interoperability test plan overview and parameter configuration). Part 1000 contains the detailed l
36、isting of all Parts of this TSB. Part 2000 to Part 2999-Guidelines for Manufacturers of CDPD equipment These Parts are informative and discuss such concerns as CDPD-specific entities (such as Mobile End Systems (M-E%), Mobile Data Base Stations (MDBSs) and Mobile Data Intermediate Systems (MD-ISS),
37、external interfaces (such as that between the Subscriber Unit (SU) and the Subscriber Identity Module (SIM) and multicasts from the perspective of each of the participating entities. Part 3000 to Part 3999-Guidelines for the CDPD Network Information Center WIC). These Parts are informative and descr
38、ibe the issues and procedures which must be addressed by an agency serving as a NIC on behalf of the CDPD community. e o Introduction TIAEINTSB-87-1014 - PART 1014 Application-Entity Look-up Directory Profile 1 Introduction This Part is directed toward Cellular Digital Packet Data (CDPD) Service Pro
39、viders and manufacturers intending to build equipment for use in the CDPD internal network. This part does not directly impact CDPD subscribers or Mobile End System (M-ES) manufacturers. This Part assumes that the reader is familiar with CDPD in general, as presented in IS-732-100. This Part defines
40、 the specific requirements for Directory User Agents PUAS) and Directory System Agents SAS) to be used in the CDPD Network to perform Application Entity Title-to-Presentation Address translation. This Part enumerates the specific features of DUAs and DSAs that may be used for this particular applica
41、tion of Directory Services. General requirements for CDPD DUAs and DSAs are defined in Part 1013. This specification covers the directory function operating in the Application Layer, which maps application-titles onto presentation-addresses. This function is carried out by use of the Directory if th
42、e information required to accomplish the mapping is not conveniently available by other means. Use of Application-Entity Look-up Directory profile is not mandatory but is recommended. - 1 o1 4-1 TIAIEIAKSB-87-1 O1 4 c Application-Entity Look-up Directory Profile 2 The users are CDPD application-enti
43、ties and the object classes of interest are also application-entities or subclasses thereof. The main attribute t.ype concerned, other than those for naming, is the presentation-address. Other attribute types, not viewed as necessary for the directory function itself, may support verQing or finding
44、out the application-entity t-ype. or the lists of supported application contexts, abstract syntaxes, and so on. Required Directory Services Application-Entity Look-up requires Directory Services as defined in Table 1014-1. Indicated are the Directory Services required to support the needs of the DUA
45、 and DSA Administrator. Directory Services TABLE 1 O1 4-1 I Modify Entry I O I M I 1 ModifyRDN I O I M I a. M: Mandatory b. O: Optional. 3 Directory Information This section defines the Directory profile needed to support Application- Entity Look-ups. Its structure and content are based on the Imple
46、mentation Agreements template suggested in OW-11, Part 1 1. 3.1 Other Profiles Supported The Application-Entity Look-up Directory profile does not require the support of other Directory profiles. 1 o1 4-2 Directory - Information TIAIEIAKSB-87-1 O1 4 3.2 Standard Application Specific Attributes and A
47、ttribute Sets Attribute I Attribute Set References 3.3 organizationName seeAiso supportedAppiicationContext I cornmonName I X.520 I X.520 X.520 X.520 I urecentatiodddress I X.520 I Object Class I descriotion I X.520 I References I 1ocalitvName I X.520 I applicationProcess organizationalunit organiza
48、tion locality root X.521 X.521 X.521 X.521 X.521 Standard Application Specific Object Classes 3.4 I adicationEntitv I X.521 I Non-Standard Application Specific Attributes and Attribute Sets There are no non-standard application specific attributes or attribute sets defined for Application-Entity Loo
49、k-up Directory Application. - 1014-3 TWEIAKSB-87-1014 Application-Entitv Look-UD Directow Profile 3.5 Non-Standard Application Specific Object Classes There are no non-standard application specific object classes defined for Application-Entity Look-up Directory Application. 3.6 Name Forms and Directory Information Tree (DIT) Structures This section defines the naming and structure rules for the application- entity object class. 3.6.1 3.6.2 Naming Attributes Attribute cornmonName is used for application-entity naming. The cornmonName should contain an application-entity qualifi
