1、TIA TELECOMMUNICATIONS SYSTEMS BULLETIN Cellular Digital Packet Data System Specification - Part 201 8 M-ES EID Assignment TSB-87-2018 Reaffirmed August 9,2002 ODECEMBER 1997 TELECOMMUNICATIONS INDUSTRY ASSOCIATION The Teleconmiunications Industry Association represents the conmiunications sector of
2、 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum de
3、lay the proper product for his particular need. Existence of such Standards and Publications shall not in any respect preclude any member or nonmember of TIA from manufacturing or selling products not conforming to such Standards and Publications, nor shall the existence of such Standards and Public
4、ations preclude their voluntary use by those other than TIA members, whether the standard is to be used either domestically or internationally. Standards, Publications and Bulletins are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action,
5、TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard, Publication, or Bulletin. Technical Bulletins are distinguished from TIA Standards or Documents, in that they contain a compilation of engineering data or information u
6、seful to the technical community, and represent approaches to good engineering practices that are suggested by the formulating committee. This Bulletin is not intended to preclude or discourage other approaches that similarly represent good engineering practice, or that may be acceptable to, or have
7、 been accepted by, appropriate bodies. Parties who wish to bring other approaches to the attention of the formulating committee to be considered for inclusion in future revisions of this Bulletin are encouraged to do so. It is the intention of the formulating committee to review this document every
8、five years, but it maybe revised and updated at any time as may be occasioned by changes in technology, industry practice, or government regulations, or for other appropriate reasons. (From Project No. 3-4017, formulated under the cognizance of the TIA TR-45.6 Subcommittee on Adjunct Wireless Packet
9、 Data Technology.) This Document was reaffirmed by the Telecommunications Industry Association on August 9,2002. Published by OTELECOMMUNICATIONS INDUSTRY ASSOCIATION 1997 Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of T
10、IA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call Global Engineering Documents, USA and Canada (1 -800-854-7 179) International (303-397-7956) or search online at http:/www.tiaonline.org/standards/search-n-order .ch All rights reserved Printed in U.S.A. NOTICE
11、 OF DISCLAIMER AND LIMITATION OF LIABILITY The document to which this Notice is affixed has been prepared by one or more Engineering Committees of the Telecommunications Industry Association (?TIA?). TIA is not the author of the document contents, but publishes and claims copyright to the document p
12、ursuant to licenses and permission granted by the authors of the contents. TIA Engineering Committees are expected to conduct their affairs in accordance with the TIA Engineering Manual (?Manual?), the current and predecessor versions of which are available at http:/www.tiaonline.orZr/standards/sfZr
13、/engineering manual.ch. TIA?S function is to administer the process, but not the content, of document preparation in accordance with the Manual and, when appropriate, the policies and procedures of the American National Standards Institute (?ANSI?). THE USE OR PRACTICE OF CONTENTS OF THIS DOCUMENT M
14、AY INVOLVE THE USE OF INTELLECTUAL PROPERTY RIGHTS (?IPR?), INCLUDING PENDING OR ISSUED PATENTS, OR COPYRIGHTS, OWNED BY ONE OR MORE PARTIES. TIA MAKES NO SEARCH OR INVESTIGATION FOR IPR. WHEN IPR CONSISTING OF PATENTS AND PUBLISHED PATENT APPLICATIONS ARE CLAIMED AND CALLED TO TIA?S ATTENTION, A ST
15、ATEMENT FROM THE HOLDER THEREOF IS REQUESTED, ALL IN ACCORDANCE WITH THE MANUAL. TIA TAKES NO POSITION WITH REFERENCE TO, AND DISCLAIMS ANY OBLIGATION TO INVESTIGATE OR INQUIRE INTO, THE SCOPE OR VALIDITY OF ANY CLAIMS OF IPR. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIM
16、ITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FORA PARTICULAR PURPOSE PARTY?S INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGAR
17、DING THE CONTENT?S COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION. OR USE, ITS MERCHANTABILITY AND ITS NON-INFRINGEMENT OF ANY THIRD TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOU
18、T LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED
19、OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. STDSEIA TSB87-2018-ENGL 1777 323Lib00 b01538 378 = TIAIEIA TELECOMMUNICATIONS SYSTEMS BULLETIN
20、Cellular Digital Packet Data System Specification - Part 2018 M-ES EID Assignment TSB87-2018 DECEMBER 1997 TELECOMMUNICATIONS INDUSTRY ASSOCIATION NOTICE TIA/EIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacture
21、rs and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for his particular need. Existence of such Standards and Publications shall not in any respect preclude any member or nonmember
22、 of TINEIA from manufacturing or selling products not conforming to such Standards and Publications, nor shall the existence of such Standards and Publications preclude their voluntary use by those other than TIA/EIA members, whether the standard is to be used either domestically or internationally.
23、 Standards, hblications and Buletins are adopted by EJA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA/EIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard, hblicatio
24、n, or Bulletin. Technical Bulletins are distinguished from TIA/EIA Standards or Interim Standards, in that they contau? a compilation of engineering data or information useful to the technical community, and represent approaches to good engineering practices that are suggested by the foxmulating com
25、mittee. This Bulleth is not intended to preclude or discourage other approaches that similarly represent good engineering practice, or that may be acceptable to, or have been accepted by, appropriate bodies. Parties who wish to bring other approaches to the attention of the formulating committee to
26、be considered for inclusion in future revisions of this Bulletin are encouraged to do so. It is the intention of the formulating committee to revise and update this Bulletin from time to time as may be occasioned by changes in technology, industry practice, or government regulations, or for other ap
27、propriate reasons. (From Project No. 4017, formulated under the cognizance of the TIA TR-45.6 Adjunct Wireless Packet Data Standards Subcommittee) Published by TJZECOMMUNICATIONS INDUSTRY ASSOCIATION 1997 Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 PRICE: Please ref
28、er to the current or call Global Engineering Documents, USA and Canada (1-800-854-7179) Catalog of EU, JEDEC and TIA STANDARDS and ENGINEERING PUBLICATIONS International (303-397-7956) All rights reserved printed in U.S.A. - TIAIEIUSB-87-2018 PART 2018 Table of Contents O Foreword 2018-iii Document
29、Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2018-iii . 0.1 1 Introduction 2018-1 2 Bit Transmission Ordering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2018-2 3 Manufacturer Identifier . . . . . .
30、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2018-2 4 Unique Word Administration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2018-2 5 Request Form for CDPD Manufacturer ID . . . . . . . . . . . . . . . . . . . . . . . . . . . .
31、. . 2018-3 Foreword TIAIEIAfEB-87-2018 PART 2018 M-ES EID Assignment O Foreword This foreword is not part of this Telecommunications Systems Bulletin. This Telecommunications Systems Bulletin has been developed by Subcommittee TR-45.6, and contains information which may be useful to implementors of
32、systems compliant with TSB-87, “Cellular Digital Packet Data System Specification,“ or its derivatives. This document contains significant portions of material originally submitted by the Cellular Digital Packet Data Forum Inc. CDPD is a technology intended to provide packet data networking services
33、 to mobile hosts. The media used to provide these services consists of radio channels typically used for Advanced Mobile Phone System (AMPS) cellular service. o. 1 Document Structure This Telecommunications Systems Bulletin is published as a series of Parts. Each Part contains information pertaining
34、 to one aspect of the system. The functional structure of this TSB is as follows: o Part 1000 to Part 1999-Guidelines for Service Providers These Parts are informative and discuss non-CDPD specific entities (such as Intermediate Systems), support services (such as directory Previous page is blank TI
35、NEIA/TSB-87-2018 M-ES EID Assignment services, accounting summary and settlement procedures, authentication, etc.), value-added services (such as subscriber location) and Service Provider issues (such as an interoperability test plan overview and parameter configuration). Part 1000 contains the deta
36、iled listing of all Parts of this TSB. Part 2000 to Part 2999-Guidelines for Manufacturers of CDPD equipment These Parts are informative and discuss such concerns as CDPD-specific entities (such as Mobile End Systems (M-ESs), Mobile Data Base Stations (MDBSs) and Mobile Data Intermediate Systems (MD
37、-ISS), external interfaces (such as that between the Subscriber Unit (SU) and the Subscriber Identity Module (SIM) and multicasts from the perspective of each of the participating entities. Part 3000 to Part 3999-Guidelines for the CDPD Network Information Center (NIC). These Parts are informative a
38、nd describe the issues and procedures which must be addressed by an agency serving as a NIC on behalf of the CDPD community. o o 201 &iv STDBEIA TSB87-2018-ENGL 1797 323qb00 ObOL5Li3 735 TIAIEIAITSB-87-2018 Introduction PART 2018 M-ES EID Assignment 1 Introduction This Part presents a tutorial on th
39、e usage of the Equipment IDentifier (EID) for manufacturers of M-ESs. This Part also provides a template application form to be used in acquiring a manufacturer identifier from the Institute of Electrical and Electronic Engineers (IEEE). The IEEE Registration Authority assigned manufacturer identifi
40、er comprises the high-order 24 bits of the EID defined in IS-732. In the EID, the manufacturer identifier is followed by a 24-bit unique CDPD M-ES number assigned by the manufacturer. The EID is used to guarantee that Temporary Equipment Identifier (TEI) requests sent by any two M-ESs are different.
41、 It appears in the following messages: O IDENTITY REQUEST Message IS-732-403 O IDENTITY ASSIGN Message IS-732-403 o The EID is further optionally used in the following Mobile Network Registration Protocol (MNRP) Messages: IDENTITY CHECK Response Message IS-732-403. O END SYSTEM HELLO IS-732-507 O EN
42、D SYSTEM BYE IS-732-507. - 2018-1 TlA/EIA/fSB-87-2018 M-ES EID Assignment Bit 2 8765432 1 The EID is further optionally used in the following Mobile Network Location Protocol (MNLP) Messages: REDIRECT REQUEST IS-732-501 e REDIRECT FLUSH IS-732-501 REDIRECT EXPIRY IS-732-501. Octet N . Octet N+5 Bit
43、Transmission Ordering Equipment Identifier The manufacturer identifier and the unique 24-bit word that is derived by the M-ES number are encoded within the messages as a sequence of 6 octets. TABLE 2018-1 Block Structure 3 The octets are transmitted in ascending numerical order: inside an octet, the
44、 least significant bit (bit 1) is the first bit to be transmitted. Manufacturer Identifier 4 IS-732 provides for the use of unique words in conjunction with Identity Assignment. Mobile Network Registration and Mobile Network Location messages. A unique word is defined as a sequence of 48 bits, where
45、 the high- order 24 bits take the value of the assigned manufacturer identifier. The following 24 bits are administered by the manufacturer identifier assignee in accordance with policies and procedures set forth by the CDPD Network Information Center. Unique Word Administration A manufacturer ident
46、ifier assignment allows the assignee to generate approximately 16 million unique words, by varying the last 24 bits. The IEEE intends not to assign another manufacturer identifier to any part of your company until you have consumed, in product, the preponderance (more than 90 percent) of this block
47、of potential unique words. It is incumbent upon your company administration to ensure that large portions of the unique word block are not left unused in manufacturing. 201 8-2 Request - Form for CDPD Manufacturer ID TIAIEIAKSB-87-2018 Furthermore, manufacturers should assign contiguous blocks of un
48、ique M-ES numbers to similar M-ES models. 5 Request Form for CDPD Manufacturer ID The request form on the following page should be used to request a manufacturer identifier from the IEEE. It is the intention that only one request per corporate entity (corporation, company, organization. agency, etc.
49、) be filled for a manufacturer identifier. If you are a subsidiary, division, or part of a company that may have previously requested an assignment, please ensure that you have not duplicated an earlier request. The IEEE will attempt to verify that one assignment is made per entity. The IEEE does not accept requests for applicant-specified assignments. Please contact the IEEE at the address listed if you have questions concerning the completion of this form. Nute-On the Request Form, check the box for confidentiality only if you wish to restrict public knowledge
