1、 TIA-1157-A August 2010 Signaling Conformance Test Specification for Interworking of CDMA2000 1X and High Rate Packet Data Systems Revision A NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and pu
2、rchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member o
3、f TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in acc
4、ordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problem
5、s associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project Proposal No. 3-0341-RV1, formulat
6、ed under the cognizance of the TIA TR-45 Mobile and Personal Communications Systems Standard, TR-45.5 Subcommittee on Spread Spectrum Technology-Mobile and Personal Communications Standard). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Department 2500 Wilson Boulevar
7、d Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call IHS, USA and Canada (1-877-413-5187) International (303-397-2896) or search online at http:/www.tiaonline.org/standards/catalog/ All right
8、s reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, pleas
9、e contact TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright OR Telecommunications Industry Association Standards (b) there is no assurance that the Docum
10、ent will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rig
11、hts (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is reque
12、sted, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the pa
13、rties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the
14、 Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of man
15、datory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragemen
16、t of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential
17、Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES,
18、EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSL
19、Y DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMEN
20、T OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING
21、 DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELE
22、MENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. 3GPP2 C.S0094-A v1.0Revision History .Revision Description of Changes Date Rev 0 v1.0 Publication 31 October 2008 Rev A v 0.7 Added test cases for simultaneous voice and data transmissi
23、on for baseline version 30 April 2010 Rev A v 0.8 V&V text. 03 June 2010 Rev A v1.0 Publication text 03 August 2010 3GPP2 C.S0094-A v1.0 i CONTENTS CONTENTS . i FOREWORD . iii (This foreword is not part of this specification) iii NORMATIVE REFERENCES . v INFORMATIVE REFERENCES vi 1 Introduction 1-1
24、1.1 Scope . 1-1 1.2 Device Modes 1-1 1.3 Testing Objective . 1-1 1.4 Execution Strategy 1-1 1.5 Notes . 1-2 1.6 Supplementary Terms and Definitions 1-2 2 Interworking of 1X and HRPD HRPD Idle Mode 2-1 2.1 Hybrid / SVDO AT Voice Origination in HRPD Idle Mode . 2-1 2.2 Hybrid / SVDO AT Voice Terminati
25、on in HRPD Idle Mode . 2-2 2.3 Hybrid / SVDO AT SMS Origination in HRPD Idle Mode 2-2 2.4 Hybrid / SVDO AT SMS Termination in HRPD Idle Mode 2-3 3 Interworking of 1X and HRPD HRPD Active Mode 3-1 3.1 Hybrid / SVDO MODE 1 AT Voice Origination in HRPD Active Mode 3-1 3.2 Hybrid / SVDO MODE 1 AT Voice
26、Termination in HRPD Active Mode 3-1 3.3 Hybrid / SVDO MODE 1 AT SMS Origination in HRPD Active Mode . 3-2 3.4 Hybrid / SVDO MODE 1 AT SMS Termination in HRPD Active Mode 3-3 3.5 Voice Origination in HRPD Active Mode for SVDO Operation 3-4 3.6 Voice Termination in HRPD Active Mode for SVDO Operation
27、3-4 3.7 SMS Origination in HRPD Active Mode for SVDO Operation . 3-5 3.8 SMS Termination in HRPD Active Mode for SVDO Operation . 3-6 4 Interworking of 1X and HRPD HRPD DORMANT Mode 4-1 4.1 Hybrid / SVDO AT Voice Origination in HRPD Dormant Mode . 4-1 4.2 Hybrid / SVDO AT Voice Termination in HRPD D
28、ormant Mode . 4-1 4.3 Hybrid / SVDO AT SMS Origination in HRPD Dormant Mode 4-2 4.4 Hybrid / SVDO AT SMS Termination in HRPD Dormant Mode 4-3 3GPP2 C.S0094-A v1.0ii 5 Inter Technology Switching 5-1 5.1 Inter Technology Switching Dormant HRPD to cdma2000 1x . 5-1 5.2 Inter Technology Switching Active
29、 HRPD to cdma2000 1x . 5-2 5.3 Inter Technology Switching Dormant cdma2000 1x to HRPD . 5-2 6 SVDO Tests . 6-1 6.1 cdma20001x Soft handoff in SVDO Operation 6-1 6.2 HRPD Soft handoff in SVDO Operation 6-1 6.3 cdma20001x Hard handoff in SVDO Operation 6-2 6.4 HRPD Hard handoff in SVDO Operation . 6-3
30、 6.5 cdma20001x Hard handoff disrupting SVDO Mode 1 Operation 6-4 6.6 HRPD Hard handoff disrupting SVDO MODE 1 Operation . 6-5 6.7 cdma20001x Operation under HRPD reverse link failure . 6-6 6.8 HRPD Operation under cdma20001x reverse link failure . 6-7 6.9 cdma20001x Preference Under PA Headroom Lim
31、itation 6-8 6.10 Preferred HRPD Channel in ConnectionRequest Message . 6-9 6.11 Multimode Capability Discovery Protocol Attribute Negotiation 6-10 7 Annex A (Informative) - Figures . 7-1 .3GPP2 C.S0094-A v1.0 iii FOREWORD 1 (This foreword is not part of this specification) 2 This Specification was p
32、repared by Technical Specification Group C of the Third Generation 3 Partnership Project 2 (3GPP2). This Specification is the first revision of the document and defines 4 air interface signaling conformance tests for CDMA/HRPD mobile stations/access terminals. This 5 version of the specification sup
33、ersedes all previous revisions.6 3GPP2 C.S0094-A v1.0iv This page is intentionally left blank.1 3GPP2 C.S0094-A v1.0 v NORMATIVE REFERENCES 1 This section provides references to other specifications and standards that are necessary to 2 implement this document. 3 The following standards contain prov
34、isions which, through reference in this text, constitute 4 provisions of this Standard. At the time of publication, the editions indicated were valid. All 5 standards are subject to revision, and parties to agreements based on this Standard are 6 encouraged to investigate the possibility of applying
35、 the most recent editions of the standards 7 indicated below. 8 1. 3GPP2 C.S0003-E, Medium Access Control (MAC) Standard for cdma2000 Spread Spectrum Systems. 2. 3GPP2 C.S0005-E, Upper Layer (Layer 3) Signaling Standard for cdma2000 Spread Spectrum Systems. 3. 3GPP2 C.S0015-B, Short Message Service
36、(SMS) for Wideband Spread Spectrum Systems - Release B, 2006 4. 3GPP2 C.S0024-C, cdma2000 High Rate Packet Data Air Interface Specification 5. 3GPP2 A.S0009-C, Interoperability Specification (IOS) for High Rate Packet Data (HRPD) Radio Access Network Interfaces with Session Control in the Packet Con
37、trol Function 6. 3GPP2 C.S0075-0, Interworking Specification for cdma2000 1x and High Rate Packet Data Systems 9 10 3GPP2 C.S0094-A v1.0vi INFORMATIVE REFERENCES 1 2 References in this section are informative. 3 IR 1. 3GPP2 S.R0108-0 HRPD-cdma2000 1x Interoperability for Voice and Data 4 System Requ
38、irements5 3GPP2 C.S0094-A v1.0 1-1 1 INTRODUCTION 1 1.1 Scope 2 This specification defines air interface signaling conformance tests for CDMA/HRPD mobile 3 stations/access terminals. It is applicable to P_REV_IN_USE equal to or less than seven, and/or 4 access terminals supporting revision 0, revisi
39、on A, revision B and/or revision C of 4. 5 In this document, mobile station or access terminal refers to a subscriber terminal, handset, 6 PDA, wireless local loop unit, or any other CDMA/HRPD subscriber terminal that communicates 7 with the base station at the air interface. Base station or access
40、network refers to the 8 composite functionality of the base station and connected network elements. A cabled 9 connection is typically used for the air interface connection between the mobile station and an 10 emulated base station(s). 11 1.2 Device Modes 12 The devices that can be tested using this
41、 specification operate under one of the following modes: 13 1. Hybrid Mode: Hybrid mode device that can support cdma20001x and HRPD by periodic 14 monitoring the paging channel of cdma20001x. Such a device prioritizes cdma20001x 15 call and is incapable of simultaneous connection on cdma20001x and H
42、RPD 16 2. SVDO Mode: SVDO mode device can support simultaneous cdma20001x and HRPD 17 traffic channels. Further, there are two different SVDO devices: 18 a. SVDO Mode 1: This mode supports only a limited separation between HRPD and 19 cdma20001x channels. This value is called referred to as the maxi
43、mum 20 Supported Bandwidth (MSBW) and is an implementation dependent value. 21 b. SVDO Mode 2: This mode supports unlimited separation between HRPD and 22 cdma20001x carrier assignments. 23 Applicability of tests to hybrid mode, SVDO mode 1, and SVDO mode 2 is indicated for each test. 24 Unless othe
44、rwise noted tests are applicable to SVDO are applicable to SVDO mode 1 and SVDO 25 mode 2. 26 1.3 Testing Objective 27 The objective of these tests is to demonstrate mobile station signaling conformance with base 28 station equipment compliant to the cdma20001family of standards. References to the a
45、pplicable 29 standard functionality are listed in the traceability section of each test case. 30 1.4 Execution Strategy 31 All features supported by the base station, such as Signaling Message Encryption, 32 Authentication, Voice Privacy, etc. should be enabled. 33 1cdma2000is the trademark for the
46、technical nomenclature for certain specifications and standards of the Organizational Partners (OPs) of 3GPP2. Geographically (and as of the date of publication), cdma2000is a registered trademark of the Telecommunications Industry Association (TIA-USA) in the United States. 3GPP2 C.S0094-A v1.01-2
47、All applicable tests should be executed for all supported Band Classes and Radio Configurations. 1 The following general comments apply to all tests: 2 a. Unless specified otherwise in a test case, channel conditions for a test shall be set to 3 have low FER. 4 b. Base stations should be configured
48、for normal operation as specified in 1 unless 5 otherwise specified in a specific test. 6 c. Unless otherwise specified, the Reverse Traffic Channel should be operated at a 7 sufficiently high Eb/Noto ensure insignificant (for example, less than 1%) FER. 8 1.5 Notes 9 “Shall” and “shall not” identif
49、y requirements to be followed strictly to conform to this document and 10 from which no deviation is permitted. “Should” and “should not” indicate that one of several 11 possibilities is recommended as particularly suitable, without mentioning or excluding others, that 12 a certain course of action is preferred but not necessarily required, or that (in the negative form) a 13 certain possibility or course of action is discouraged but not prohibited. “May” and “need not” 14 indicate a course of action permissible within the limits of the document. “Can” and “
