1、 TIA STANDARD Physical Layer Standard for cdma2000Spread Spectrum Systems Addendum 1 TIA-2000.2-D-1E January 2006 TELECOMMUNICATIONS INDUSTRY ASSOCIATION The Telecommunications Industry Association represents the communications sector of Copyright Telecommunications Industry Association Provided by
2、IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchang
3、eability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selli
4、ng products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American Nationa
5、l Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all
6、applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Standards Proposal No. 3-4694-RV4-AD1E, formulated under the cognizance of
7、 the TIA TR-45.5 Subcommittee on Spread Spectrum Digital Technology). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDA
8、RDS AND ENGINEERING PUBLICATIONS or call Global Engineering Documents, USA and Canada (1-800-854-7179) International (303-397-7956) or search online at http:/www.tiaonline.org/standards/search_n_order.cfm All rights reserved Printed in U.S.A. Copyright Telecommunications Industry Association Provide
9、d by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyrig
10、ht permission. For copyright permission to reproduce portions of this document, please contact TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/about/faqDetail.cfm?id=18 OR Telecommunicatio
11、ns Industry Association Standards (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of
12、contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed
13、and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussi
14、ons of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manua
15、l have been complied with as respects the Document or its contents. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document.
16、ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NON-INFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIG
17、HTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED
18、TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL D
19、AMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS
20、A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,
21、TIA-2000.2-D-1 CONTENTS i FOREWORDxli 1 NOTES xliii 2 REFERENCES xlvii 3 1 GENERAL. 1-1 4 1.1 Terms1-1 5 1.2 Numeric Information .1-15 6 1.2.1 Mobile Station Stored Parameters1-15 7 1.2.2 Base Station Parameters1-20 8 1.2.3 MAC Interface1-21 9 1.2.3.1 Service Interfaces.1-21 10 1.2.3.2 MAC Interf
22、ace Parameters .1-22 11 1.2.3.3 Service Interface Primitives Received by the Physical Layer1-24 12 1.2.3.4 Service Interface Primitives Sent from the Physical Layer.1-26 13 1.3 CDMA System Time.1-28 14 1.4 Tolerances.1-30 15 1.5 Reserved Bits 1-30 16 2 REQUIREMENTS FOR MOBILE STATION CDMA OPERATION
23、2-1 17 2.1 Transmitter .2-1 18 2.1.1 Frequency Parameters .2-1 19 2.1.1.1 Channel Spacing and Designation .2-1 20 2.1.1.2 Frequency Tolerance2-1 21 2.1.2 Power Output Characteristics2-1 22 2.1.2.1 Maximum Output Power2-1 23 2.1.2.2 Output Power Limits2-1 24 2.1.2.2.1 Minimum Controlled Output Power2
24、1 25 2.1.2.2.2 Gated Output Power.2-2 26 2.1.2.2.2.1 Gated Output Power Except During a Serving Frequency PUF 27 Probe2-2 28 2.1.2.2.2.2 Gated Output Power During a Serving Frequency PUF Probe .2-3 29 2.1.2.2.3 Standby Output Power.2-3 30 2.1.2.3 Controlled Output Power .2-3 31 2.1.2.3.1 Estimated
25、Open Loop Output Power 2-4 32 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-2000.2-D-1 CONTENTS ii 2.1.2.3.1.1 Open Loop Output Power When Transmitting on the Access 1 Cha
26、nnel .2-4 2 2.1.2.3.1.2 Open Loop Output Power When Transmitting on the Enhanced 3 Access Channel2-5 4 2.1.2.3.1.3 Open Loop Output Power When Transmitting on the Reverse 5 Common Control Channel2-6 6 2.1.2.3.1.4 Open Loop Output Power When Transmitting on the Reverse 7 Traffic Channel with Radio Co
27、nfiguration 1 or 2.2-8 8 2.1.2.3.1.5 Open Loop Output Power When Transmitting on the Reverse 9 Traffic Channel with Radio Configuration 3, 4, 5, 6, or 72-10 10 2.1.2.3.2 Closed Loop Output Power.2-12 11 2.1.2.3.3 Code Channel Output Power for Other than the Reverse Pilot 12 Channel2-14 13 2.1.2.3.3.
28、1 Code Channel Output Power for the Reverse Secondary Pilot 14 Channel .2-14 15 2.1.2.3.3.2 Code Channel Output Power for the Enhanced Access Channel 16 Header, Enhanced Access Channel Data, and Reverse Common 17 Control Channel Data 2-15 18 2.1.2.3.3.3 Code Channel Output Power for the Reverse Pack
29、et Data 19 Control Channel.2-17 20 2.1.2.3.3.4 Code Channel Output Power for the Reverse Request Channel 2-20 21 2.1.2.3.3.5 Code Channel Output Power for the Reverse Acknowledgment 22 Channel .2-22 23 2.1.2.3.3.6 Code Channel Output Power for the Reverse Channel Quality 24 Indicator Channel 2-23 25
30、 2.1.2.3.3.7 Code Channel Output Power for the Reverse Traffic Channel 26 with Radio Configuration 3, 4, 5, or 6 2-25 27 2.1.2.3.3.8 Code Channel Output Power for the Reverse Packet Data 28 Channel with Radio Configuration 7 2-33 29 2.1.2.4 Power Transition Characteristics .2-37 30 2.1.2.4.1 Open Lo
31、op Estimation .2-37 31 2.1.2.4.2 Closed Loop Correction2-38 32 2.1.2.4.3 Phase Continuity Requirements for Radio Configurations 3 through 33 7.2-38 34 2.1.3 Modulation Characteristics .2-38 35 2.1.3.1 Reverse CDMA Channel Signals 2-38 36 Copyright Telecommunications Industry Association Provided by
32、IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-2000.2-D-1 CONTENTS iii 2.1.3.1.1 Channel Structures2-40 1 2.1.3.1.1.1 Spreading Rate 12-41 2 2.1.3.1.1.2 Spreading Rate 32-55 3 2.1.3.1.2 Modulation Parameters 2-60 4 2.1.3.1.2.1 Spreadi
33、ng Rate 12-60 5 2.1.3.1.2.2 Spreading Rate 32-75 6 2.1.3.1.3 Data Rates .2-86 7 2.1.3.1.4 Frame Error Detection .2-89 8 2.1.3.1.4.1 Generation of the Frame Quality Indicator Bits 2-91 9 2.1.3.1.4.1.1 Frame Quality Indicator of Length 16 .2-91 10 2.1.3.1.4.1.2 Frame Quality Indicator of Length 12 .2-
34、92 11 2.1.3.1.4.1.3 Frame Quality Indicator of Length 10 .2-92 12 2.1.3.1.4.1.4 Frame Quality Indicator of Length 8 .2-93 13 2.1.3.1.4.1.5 Frame Quality Indicator of Length 6 except for the Reverse 14 Fundamental Channel with Radio Configuration 2 2-93 15 2.1.3.1.4.1.6 Frame Quality Indicator of Len
35、gth 6 for the Reverse 16 Fundamental Channel with Radio Configuration 2 2-94 17 2.1.3.1.5 Forward Error Correction.2-95 18 2.1.3.1.5.1 Convolutional Encoding .2-97 19 2.1.3.1.5.1.1 Rate 1/4 Convolutional Code2-97 20 2.1.3.1.5.1.2 Rate 1/3 Convolutional Code2-98 21 2.1.3.1.5.1.3 Rate 1/2 Convolutiona
36、l Code2-99 22 2.1.3.1.5.2 Turbo Encoding2-99 23 2.1.3.1.5.2.1 Rate 1/2, 1/3, 1/4, and 1/5 Turbo Encoders.2-100 24 2.1.3.1.5.2.2 Turbo Code Termination.2-102 25 2.1.3.1.5.2.3 Turbo Interleavers 2-103 26 2.1.3.1.5.3 Block Encoding 2-107 27 2.1.3.1.5.3.1 (12, 4) Block Code 2-107 28 2.1.3.1.5.3.2 (64, 6
37、) Orthogonal Block Code 2-107 29 2.1.3.1.6 Code Symbol Repetition .2-110 30 2.1.3.1.7 Puncturing.2-112 31 2.1.3.1.7.1 Convolutional Code Symbol Puncturing .2-112 32 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking per
38、mitted without license from IHS-,-,-TIA-2000.2-D-1 CONTENTS iv 2.1.3.1.7.2 Turbo Code Symbol Puncturing .2-112 1 2.1.3.1.7.3 Flexible and Variable Rate Puncturing .2-113 2 2.1.3.1.8 Block Interleaving2-114 3 2.1.3.1.8.1 Interleaving for the Reverse Traffic Channel with Radio 4 Configurations 1 and 2
39、 2-114 5 2.1.3.1.8.2 Bit-Reversal Interleaving2-114 6 2.1.3.1.8.3 Interleaving for the Reverse Packet Data Channel 2-115 7 2.1.3.1.8.3.1 Symbol Separation .2-115 8 2.1.3.1.8.3.2 Subblock Interleaving 2-116 9 2.1.3.1.8.3.3 Symbol Grouping .2-117 10 2.1.3.1.9 Sequence Repetition 2-117 11 2.1.3.1.10 Su
40、bpacket Symbol Selection for the Reverse Packet Data Channel 2-117 12 2.1.3.1.11 Modulation for the Reverse Packet Data Channel.2-118 13 2.1.3.1.11.1 BPSK Modulation.2-118 14 2.1.3.1.11.2 QPSK Modulation.2-118 15 2.1.3.1.11.3 8-PSK Modulation2-119 16 2.1.3.1.11.4 Modulation Types.2-120 17 2.1.3.1.12
41、 Sequence Demultiplexing and Walsh Processing for the Reverse 18 Packet Data Channel 2-121 19 2.1.3.1.13 Orthogonal Modulation and Spreading.2-122 20 2.1.3.1.13.1 Orthogonal Modulation 2-122 21 2.1.3.1.13.2 Orthogonal Spreading 2-124 22 2.1.3.1.14 Gated Transmission.2-128 23 2.1.3.1.14.1 Rates and G
42、ating for Radio Configurations 1 and 22-128 24 2.1.3.1.14.2 Data Burst Randomizing Algorithm for Radio Configurations 1 25 and 2 .2-131 26 2.1.3.1.14.3 Gating During a PUF Probe2-132 27 2.1.3.1.14.4 Reverse Pilot Channel Gating.2-132 28 2.1.3.1.14.5 Reverse Secondary Pilot Channel Gating2-133 29 2.1
43、3.1.14.6 Enhanced Access Channel Preamble Gating 2-133 30 2.1.3.1.14.7 Reverse Common Control Channel Preamble Gating 2-133 31 2.1.3.1.14.8 Reverse Channel Quality Indicator Channel Gating2-133 32 2.1.3.1.14.9 Reverse Fundamental Channel Gating .2-133 33 Copyright Telecommunications Industry Associ
44、ation Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-2000.2-D-1 CONTENTS v 2.1.3.1.15 Reverse Power Control Subchannel 2-133 1 2.1.3.1.15.1 Reverse Power Control Subchannel Structure 2-134 2 2.1.3.1.15.2 Outer Power Contro
45、l Loop 2-140 3 2.1.3.1.15.3 Inner Power Control Loop.2-142 4 2.1.3.1.16 Direct Sequence Spreading 2-142 5 2.1.3.1.17 Quadrature Spreading .2-145 6 2.1.3.1.17.1 Spreading Rate 12-148 7 2.1.3.1.17.2 Spreading Rate 32-149 8 2.1.3.1.18 Baseband Filtering.2-150 9 2.1.3.1.18.1 Spreading Rate 12-150 10 2.1
46、3.1.18.2 Spreading Rate 32-151 11 2.1.3.1.19 Carrier Phase Offset for Radio Configurations 1 and 2 .2-154 12 2.1.3.2 Reverse Pilot Channel 2-154 13 2.1.3.2.1 Reverse Power Control Subchannel2-154 14 2.1.3.2.2 Reverse Pilot Channel Spreading2-155 15 2.1.3.2.3 Reverse Pilot Channel Gating .2-155 16 2
47、1.3.2.4 Reverse Pilot Channel Operation during Reverse Traffic Channel 17 Preamble.2-158 18 2.1.3.2.5 Reverse Pilot Channel Quadrature Spreading.2-159 19 2.1.3.2.6 Reverse Pilot Channel Baseband Filtering 2-159 20 2.1.3.2.7 Reverse Pilot Channel Transmission Processing .2-159 21 2.1.3.3 Reverse Sec
48、ondary Pilot Channel .2-159 22 2.1.3.3.1 Reverse Secondary Pilot Channel Time Alignment 2-159 23 2.1.3.3.2 Reverse Secondary Pilot Channel Orthogonal Spreading 2-160 24 2.1.3.3.3 Reverse Secondary Pilot Channel Gating2-160 25 2.1.3.3.4 Reverse Secondary Pilot Channel Quadrature Spreading2-160 26 2.1
49、3.3.5 Reverse Secondary Pilot Channel Baseband Filtering .2-160 27 2.1.3.3.6 Reverse Secondary Pilot Channel Transmission Processing 2-160 28 2.1.3.4 Access Channel .2-160 29 2.1.3.4.1 Access Channel Time Alignment and Modulation Rate .2-160 30 2.1.3.4.2 Access Channel Frame Structure .2-161 31 2.1.3.4.2.1 Access Channel Preamble.2-161 32 Copyright Telecommunications Industry As
