1、 TIA-4959-A (Revision of TIA-4959) September 2015 Recommended Minimum Performance Standards for Extended Cell cdma2000High Rate Packet Data Access Terminal NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufa
2、cturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member o
3、r non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted
4、 by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all
5、safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. Any use of trademarks in this doc
6、ument are for information purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Project No. TIA-PN-4959-A, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Co
7、mmittee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending
8、 or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with t
9、he Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA o
10、pine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more
11、 Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional
12、elements (as defined in the TIA Procedures for American National Standards) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary dis
13、closure (see TIA Procedures for American National Standards Annex C.1.2.3) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of
14、Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WA
15、RRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TI
16、A EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN T
17、HE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
18、(INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDA
19、MENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. 3GPP2 C.S0104-A v1.0 Revision History Revision Description of Changes Date Rev 0 v1.0 Initial publication December 2011 Rev A v1.0 Add new BC support May 2015 Rev A v1.0 Repub
20、lication to fix some editorial issues September 2015 3GPP2 C.S0104-A v1.0 CONTENTS i 1 Introduction 1-1 1 1.1 Scope 1-1 2 1.2 Terms and Definitions . 1-1 3 1.2.1 Definitions . 1-1 4 1.2.2 Terms 1-8 5 1.3 xHRPD Equations 1-9 6 1.3.1 Transmit Power of the Sector . 1-9 7 1.3.2 Received Signal Strength
21、. 1-9 8 1.3.2.1 Single-Path Case 1-9 9 1.3.2.2 Two-Path Case . 1-9 10 1.3.2.3 Three-Path Case 1-10 11 1.4 Tolerances . 1-10 12 1.4.1 xHRPD System Parameter Tolerances 1-10 13 1.4.2 Measurement Tolerances . 1-10 14 2 Standard Radiated Emissions Measurement Procedure . 2-1 15 2.1 Standard Radiation Te
22、st Site . 2-1 16 2.2 Search Antenna . 2-1 17 2.3 Field-Strength Measurement . 2-2 18 2.4 Frequency Range of Measurements . 2-2 19 2.5 Test Ranges . 2-2 20 2.5.1 30-Meter Test Range 2-2 21 2.5.2 3-Meter Test Range 2-2 22 2.6 Radiated Signal Measurement Procedures . 2-3 23 3 Physical Layer Receiver Mi
23、nimum Standards 3-1 24 3.1 Frequency Coverage Requirements 3-1 25 3.2 Demodulation Requirements . 3-1 26 3.2.1 Demodulation of Forward Traffic Channel in AWGN . 3-1 27 3.2.1.1 Definition . 3-1 28 3.2.1.2 Method of Measurement 3-1 29 3.2.1.3 . Minimum Standard 3-2 30 3.2.2 Demodulation of Forward Tra
24、ffic Channel in Multipath Fading Channel 3-2 31 3GPP2 C.S0104-A v1.0 CONTENTS ii 3.2.2.1 Definition 3-2 1 3.2.2.2 Method of Measurement 3-3 2 3.2.2.3 Minimum Standard . 3-4 3 3.2.3 Decision of Power Control Bit 3-5 4 3.2.3.1 Definition 3-5 5 3.2.3.2 Method of Measurement 3-5 6 3.2.3.3 Minimum Standa
25、rd . 3-5 7 3.2.4 Decision of Frequency Control Bit . 3-5 8 3.2.4.1 Definition 3-5 9 3.2.4.2 Method of Measurement 3-5 10 3.2.4.3 Minimum Standard . 3-6 11 3.2.5 Demodulation of Broadcast Channel . 3-6 12 3.2.5.1 Definition 3-6 13 3.2.5.2 Method of Measurement 3-7 14 3.2.5.3 Minimum Standard . 3-8 15
26、 3.3 Receiver Performance 3-9 16 3.3.1 Receiver Sensitivity and Dynamic Range . 3-9 17 3.3.1.1 Definition 3-9 18 3.3.1.2 Method of Measurement 3-9 19 3.3.1.3 Minimum Standard . 3-10 20 3.3.2 Single Tone Desensitization . 3-10 21 3.3.2.1 Definition 3-10 22 3.3.2.2 Method of Measurement 3-10 23 3.3.2.
27、3 Minimum Standard . 3-11 24 3.3.3 Intermodulation Spurious Response Attenuation 3-11 25 3.3.3.1 Definition 3-11 26 3.3.3.2 Method of Measurement 3-11 27 3.3.3.3 Minimum Standard . 3-13 28 3.3.4 Adjacent Channel Selectivity . 3-13 29 3.3.4.1 Definition 3-13 30 3.3.4.2 Method of Measurement 3-13 31 3
28、GPP2 C.S0104-A v1.0 CONTENTS iii 3.3.4.3 Minimum Standard 3-14 1 3.3.5 Receiver Blocking Characteristics 3-14 2 3.3.5.1 Definition . 3-14 3 3.3.5.2 Method of Measurement 3-14 4 3.3.5.3 Minimum Standards 3-15 5 3.4 Limitations on Emissions 3-15 6 3.4.1 Conducted Spurious Emissions . 3-15 7 3.4.1.1 De
29、finition . 3-15 8 3.4.1.2 Method of Measurement 3-15 9 3.4.1.3 Minimum Standard 3-16 10 3.4.2 Radiated Spurious Emissions 3-16 11 3.4.2.1 Definition . 3-16 12 3.4.2.2 Method of Measurement 3-16 13 3.4.2.3 Minimum Standard 3-16 14 4 Physical Layer Transmitter Minimum Standards . 4-1 15 4.1 Frequency
30、Requirements . 4-1 16 4.1.1 Frequency Coverage . 4-1 17 4.1.2 Frequency Accuracy 4-1 18 4.1.2.1 Definition . 4-1 19 4.1.2.2 Method of Measurement 4-1 20 4.1.2.3 Minimum Standard 4-1 21 4.2 Modulation Requirements . 4-1 22 4.2.1 Time Reference 4-1 23 4.2.1.1 Definition . 4-1 24 4.2.1.2 Method of Meas
31、urement 4-1 25 4.2.1.3 Minimum Standard 4-2 26 4.2.2 Waveform Quality and Frequency Accuracy . 4-2 27 4.2.2.1 Definition . 4-2 28 4.2.2.2 Method of Measurement 4-2 29 4.2.2.3 Minimum Standard 4-2 30 4.3 RF Output Power Requirements 4-2 31 3GPP2 C.S0104-A v1.0 CONTENTS iv 4.3.1 Range of Closed Loop P
32、ower Control 4-2 1 4.3.1.1 Definition 4-2 2 4.3.1.2 Method of Measurement 4-3 3 4.3.1.3 Minimum Standard . 4-3 4 4.3.2 Maximum RF Output Power 4-4 5 4.3.2.1 Definition 4-4 6 4.3.2.2 Method of Measurement 4-4 7 4.3.2.3 Minimum Standard . 4-4 8 4.3.3 Minimum Controlled Output Power . 4-5 9 4.3.3.1 Def
33、inition 4-5 10 4.3.3.2 Method of Measurement 4-5 11 4.3.3.3 Minimum Standard . 4-5 12 4.3.4 Standby Output Power 4-5 13 4.3.4.1 Definition 4-5 14 4.3.4.2 Method of Measurement 4-5 15 4.3.4.3 Minimum Standard . 4-6 16 4.4 Limitations on Emissions 4-6 17 4.4.1 Conducted Spurious Emissions . 4-6 18 4.4
34、.1.1 Definition 4-6 19 4.4.1.2 Method of Measurement 4-6 20 4.4.1.3 Minimum Standard . 4-7 21 4.4.2 Radiated Spurious Emissions 4-8 22 5 MAC Layer Minimum Standards . 5-1 23 5.1 Control Channel Supervision 5-1 24 5.1.1 Definition 5-1 25 5.1.2 Method of Measurement 5-1 26 5.1.3 Minimum Standard . 5-2
35、 27 5.2 Data Rate Control Performance . 5-2 28 5.2.1 Definition 5-2 29 5.2.2 Method of Measurement 5-2 30 5.2.3 Minimum Standard . 5-3 31 3GPP2 C.S0104-A v1.0 CONTENTS v 5.3 Supervision Procedures in Variable Rate State 5-3 1 5.3.1 Definition . 5-3 2 5.3.2 Method of Measurement 5-4 3 5.3.3 Minimum S
36、tandard . 5-4 4 5.4 Access Probes 5-4 5 5.4.1 Definition . 5-4 6 5.4.2 Method of Measurement 5-4 7 5.4.3 Minimum Standard . 5-5 8 5.5 Reverse Traffic Channel Initial Transmission . 5-5 9 5.5.1 Definition . 5-5 10 5.5.2 Method of Measurement 5-5 11 5.5.3 Minimum Standard . 5-6 12 6 Connection Layer M
37、inimum Standards . 6-1 13 6.1 Idle Handoff in Continuous Operation Mode 6-1 14 6.1.1 Definition . 6-1 15 6.1.2 Method of Measurement 6-1 16 6.1.3 Minimum Standard . 6-3 17 6.2 Idle Handoff in Slotted Operation Mode . 6-3 18 6.2.1 Definition . 6-3 19 6.2.2 Method of Measurement 6-4 20 6.2.3 Minimum S
38、tandard . 6-5 21 6.3 Neighbor Set Pilot Detection and Incorrect Detection . 6-5 22 6.3.1 Definition . 6-5 23 6.3.2 Method of Measurement 6-5 24 6.3.3 Minimum Standard . 6-8 25 6.4 Candidate Set Pilot Detection and Incorrect Detection . 6-8 26 6.4.1 Definition . 6-8 27 6.4.2 Method of Measurement 6-9
39、 28 6.4.3 Minimum Standard . 6-11 29 6.5 Active Set Pilot Loss Detection . 6-11 30 6.5.1 Definition . 6-11 31 3GPP2 C.S0104-A v1.0 CONTENTS vi 6.5.2 Method of Measurement 6-12 1 6.5.3 Minimum Standard . 6-14 2 6.6 Hard Handoff to another Frequency 6-14 3 6.6.1 Definition 6-14 4 6.6.2 Method of Measu
40、rement 6-15 5 6.6.3 Minimum Standard . 6-16 6 7 Environmental Requirements 7-1 7 7.1 Temperature and Power Supply Voltage 7-1 8 7.1.1 Definition 7-1 9 7.1.2 Method of Measurement 7-1 10 7.1.3 Minimum Standard . 7-2 11 7.2 High Humidity 7-2 12 7.2.1 Definition 7-2 13 7.2.2 Method of Measurement 7-2 1
41、4 7.2.3 Minimum Standard . 7-3 15 7.3 Vibration Stability . 7-3 16 7.3.1 Definition 7-3 17 7.3.2 Method of Measurement 7-3 18 7.3.3 Minimum Standard . 7-3 19 7.4 Shock Stability 7-3 20 7.4.1 Definition 7-3 21 7.4.2 Method of Measurement 7-3 22 7.4.3 Minimum Standard . 7-4 23 8 Standard Test Conditio
42、ns . 8-1 24 8.1 Standard Equipment . 8-1 25 8.1.1 Basic Equipment . 8-1 26 8.1.2 Associated Equipment . 8-1 27 8.2 Standard Environmental Test Conditions 8-1 28 8.3 Standard Conditions for the Primary Power Supply . 8-1 29 8.3.1 General . 8-1 30 8.3.2 Standard DC Test Voltage from Accumulator Batter
43、ies 8-1 31 3GPP2 C.S0104-A v1.0 CONTENTS vii 8.3.3 Standard AC Voltage and Frequency 8-2 1 8.4 Standard Test Equipment 8-2 2 8.4.1 Standard Channel Simulator . 8-2 3 8.4.1.1 Standard Channel Simulator Configurations 8-4 4 8.4.2 Waveform Quality Measurement Equipment 8-5 5 8.4.2.1 Rho Meter 8-5 6 8.4
44、.3 Access Network Simulator . 8-8 7 8.4.3.1 Transmitter 8-8 8 8.4.3.2 Receiver . 8-9 9 8.4.3.3 Protocol Support 8-9 10 8.4.3.4 Timing Signals . 8-9 11 8.4.3.5 General Requirements . 8-9 12 8.4.4 AWGN Generator . 8-10 13 8.4.5 CW Generator 8-11 14 8.4.6 Spectrum Analyzer 8-11 15 8.4.7 Average Power M
45、eter 8-12 16 8.5 Functional System Setups . 8-13 17 8.5.1 Functional Block Diagrams 8-13 18 8.5.2 General Comments 8-16 19 8.6 Error Rates Measurement 8-21 20 8.6.1 Control Channel PER . 8-21 21 8.6.2 Forward Traffic Channel PER . 8-22 22 8.6.3 BCMCS PER 8-22 23 8.7 Throughput Calculation 8-22 24 8.
46、8 Confidence Interval 8-23 25 8.8.1 Confidence Level of Error Rate . 8-23 26 8.8.2 Confidence on Power Measurement During Fading 8-25 27 8.8.3 Confidence level of Detection Time . 8-26 28 ANNEX A SELECTED PERFORMANCE REQUIREMENTS TABLES . 1 29 A.1 Demodulation Requirements 1 30 A.1.1 Demodulation of
47、 Forward Traffic Channel in AWGN . 1 31 3GPP2 C.S0104-A v1.0 CONTENTS viii A.1.1.1 Method of Measurement . 1 1 A.1.1.2 Minimum Standard 7 2 A.1.2 Demodulation of Forward Traffic Channel in Multipath Fading Channel 11 3 A.1.2.1 Method of Measurement . 11 4 A.1.2.2 Minimum Standard 18 5 A.1.3 Demodula
48、tion of Broadcast Channel 22 6 A.1.3.1 Method of Measurement . 22 7 A.1.3.2 Minimum Standard 25 8 9 3GPP2 C.S0104-A v1.0 FIGURES ix Figure 6.1.2-1 Idle Handoff in Continuous Operation Mode (Test 1) 6-2 1 Figure 6.1.2-2 Idle Handoff in Continuous Operation Mode (Test 2) 6-3 2 Figure 6.2.2-1. Idle Han
49、doff for Slotted Operation Mode 6-5 3 Figure 6.3.2-1. Neighbor Set Pilot Detection (Tests 1 and 2) 6-7 4 Figure 6.3.2-2. Neighbor Set Pilot Incorrect Detection (Test 3) . 6-8 5 Figure 6.4.2-1. Candidate Set Pilot Detection (Test 1) 6-10 6 Figure 6.4.2-2. Candidate Set Incorrect Detection (Test 2) . 6-11 7 Figure 6.5.2-1. Active Set Pilot Loss Detection (Tests 2 and 3) . 6-14 8 Figure 8.4.1-1. Autocorrelation Coefficient of the Phase 8-3 9 Figure 8.4.2.1-1. Block diagram for Waveform Quality and Code Domain Power Coefficients 10 Calculation . 8-8 11 Figure 8.5.1-1. Functional Set-up for T
