1、 TIA-920.130-A (Revision of TIA-920) February 2011Telecommunications Telephone Terminal Equipment Transmission Requirements for Wideband Digital Wireline Telephones with Headset NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderst
2、andings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect
3、 preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Pu
4、blications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not p
5、urport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Proje
6、ct No. 3-4705.130-RV1, formulated under the cognizance of the TIA TR-41 User Premises Telecommunications Requirements, TR-41.3 Subcommittee on Analog and Digital Wire line Terminals. Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Department 2500 Wilson Boulevard Arling
7、ton, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call IHS, USA and Canada (1-877-413-5187) International (303-397-2896) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserv
8、ed Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contac
9、t the TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright or Telecommunications Industry Association Technology (b) there is no assurance that the Document
10、 will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights
11、 (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requeste
12、d, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parti
13、es involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Do
14、cument contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandat
15、ory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement o
16、f voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Pat
17、ent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXP
18、RESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY D
19、ISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT O
20、R PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DA
21、MAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMEN
22、T OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA-920.130-A i Table of Contents 1. SCOPE 1 1.1. LIMITS OF APPLICABILITY 1 1.2. CATEGORIES OF CRITERIA 1 1.3. FCC PART 68 2 1.4. ENVIRONMENTAL . 2 1.5. SAFETY . 2 2. NORMATIVE REFERENCES
23、3 3. DEFINITIONS, ABBREVIATIONS AND ACRONYMS . 4 3.1. DEFINITIONS . 4 3.1.1. Artificial Ear/Mouth .and Ear/Mouth Simulators . 4 3.1.2. Codec 4 3.1.3. Direct Digital Signal Processing . 4 3.1.4. Ear Reference Point (ERP) . 4 3.1.5. Electric Power and Noise Levels 4 3.1.6. Mouth Reference Point (MRP)
24、. 4 3.1.7. Nominal Volume Control Setting . 4 3.1.8. Preferred Ear Simulator 4 3.1.9. Recommended Test Position (RTP) 4 3.1.10. Reference Codec 4 3.1.11. Sound Pressure Level. 5 3.2. ABBREVIATIONS AND ACRONYMS . 5 4. GENERAL TECHNICAL REQUIREMENTS 6 4.1. REFERENCE CODECS 6 4.1.1. L16-256 Reference C
25、odec 6 4.1.2. Other Reference Codecs 7 4.2. TEST SIGNALS. 7 4.2.1. Choice of Test Signal 7 4.2.2. Analysis. 7 4.2.3. Analysis Limitation Using ITU-T P.50. 7 4.3. PRECAUTIONS. 7 4.4. TEST ARRANGEMENTS . 8 4.4.1. Reference Codec Arrangement . 8 4.4.2. Direct Digital Signal Processing Arrangement . 8 4
26、.4.3. Send General Test Setup Arrangement . 8 4.4.4. Receive General Test Setup Arrangement 9 5. HEADSET TECHNICAL REQUIREMENTS . 10 5.1. SEND. 10 5.1.1. Headset Send Frequency Response. 10 5.1.2. Headset Wideband Send Loudness Rating (SLR). 12 5.1.3. Headset Send Noise 12 5.1.4. Headset Send Single
27、 Frequency Interference . 12 5.1.5. Headset Send Distortion and Noise. 13 5.1.6. Headset Send Delay 14 5.2. RECEIVE 16 TIA-920.130-A ii 5.2.1. Headset Receive Frequency Response 16 5.2.2. Headset Wideband Receive Loudness Rating (RLR)18 5.2.3. Headset Receive Noise 18 5.2.4. Headset Receive Single F
28、requency Interference .18 5.2.5. Headset Receive Distortion and Noise 19 5.2.6. Headset Receive Delay21 5.3. HEADSET TALKER SIDETONE22 5.3.1. Headset Sidetone Masking Rating (STMR) 22 5.3.2. Headset Sidetone Delay.22 5.4. ECHO RETURN LOSS AND STABILITY .23 5.4.1. Weighted Terminal Coupling Loss (TCL
29、w)23 5.4.2. Stability Loss.24 ANNEX A (NORMATIVE) CALCULATION OF LOUDNESS RATINGS AND SIDETONE MASKING RATING 26 A.1 WIDEBAND SEND LOUDNESS RATING (HANDSET AND HEADSET): .26 A.2 WIDEBAND RECEIVE LOUDNESS RATING (HANDSET AND HEADSET): 26 A.3 SIDETONE MASKING RATING (HANDSET AND HEADSET):.27 ANNEX B (
30、NORMATIVE) DRP TO ERP TRANSFER FUNCTION.28 ANNEX C (INFORMATIVE) MEASUREMENT AND LEVEL CONVERSIONS.29 ANNEX D (INFORMATIVE) R40 PREFERRED FREQUENCIES .30 ANNEX E (INFORMATIVE) RECEIVE ACOUSTIC LIMITING 32 ANNEX F (INFORMATIVE) TRANSMISSION REQUIREMENTS FOR WIDEBAND DIGITAL WIRELINE TELEPHONES DOCUME
31、NT(S)33 ANNEX G (INFORMATIVE) BIBLIOGRAPHY35 TIA-920.130-A iii Table of Figures Figure 1 Digital Telephone Set Test Arrangement with Reference Codec .8 Figure 2 Digital Telephone Set Test Arrangement using Direct Digital Signaling.8 Figure 3 Headset Send Test Setup Arrangement.9 Figure 4 Headset Rec
32、eive Test Setup Arrangement9 Figure 5 Headset Send Frequency Response Mask.11 Figure 6 Headset Receive Frequency Response Mask at ERP17 Figure 7 Terminal Coupling Loss Measurement Method .24 Figure 8 Reference Corner 25 Table of Tables Table 1 Co-ordinates of Headset Send Response Limits 11 Table 2
33、Limits for Send SDNR vs Frequency.13 Table 3 Limits for Send SDNR vs Level.13 Table 4 Send SDNR Stimulus Center Frequencies and Band Limits14 Table 5 Send SDNR Analysis Notch Frequency Band .14 Table 6 Headset Send Delay Requirements 15 Table 7 Co-ordinates of Headset Receive Response Limits at ERP
34、.17 Table 8 Limits for Receive SDNR vs. Frequency.19 Table 9 Limits for Receive SDNR vs Level19 Table 10 Receive SDNR Stimulus Center Frequencies and Band Limits.20 Table 11 Receive SDNR Analysis Notch Frequency Band 20 Table 12 Headset Receive Delay Requirements21 Table A.1 (Ref. ITU-T P.79 Annex A
35、, Table A.2 and Table B.2) Weighting factors for calculating wideband loudness ratings and STMR .27 Table B.1 DRP to ERP Correction Factors .28 Table D.1 ISO R40 and R10 Preferred Frequencies, 1/12thand 1/3rdOctave Frequencies30 TIA-920.130-A iv FOREWORD (This foreword is not part of this standard.)
36、 This document is a TIA Telecommunications standard produced by Working Group TR-41.3.3 of Committee TR-41. This standard was developed in accordance with TIA procedural guidelines, and represents the consensus position of the Working Group and its parent Subcommittee TR-41.3, which served as the fo
37、rmulating group. This standard is based on TIA-920. There are six annexes in this Standard. Annex A and Annex B are normative and are considered part of this Standard. Annex C, Annex D Annex E and Annex G are informative and are not considered part of this Standard. The leadership of the TR-41.3.3 V
38、oIP and PCM Digital Transmission Performance Working Group (Chair: Al Baum, Uniden and Allen Woo, Plantronics) acknowledge the written contributions provided by the following individuals in the development of this standard. Organization Representative Previous Version TIA-920.130-APlantronics Allen
39、Woo 9 9 Editor Texas Instruments Warren Karapetian - 9 Editor AST Technology Labs Don McKinnon 9 Editor Nortel Networks Roger Britt 9 Editor 9 Siemens Ron Magnuson 9 Editor Alcatel Francois Pinier 9 AST Technology Labs James Bress - 9 Bob Young & Associates Bob Young 9 9 Cisco Systems Ram Jagadeesan
40、 9 Cisco Systems Michael Knappe 9 Cisco Systems Kirit Patel 9 Consultant in Electroacoustics John Bareham 9 9 CenturyLink Amar Ray 9 IEEE STIT John Bareham 9 9 IEEE STIT Rodolfo Ceruti 9 IEEE STIT Glenn Hess 9 IEEE STIT Bob Young 9 Intel Corporation Mike Dunn 9 Microsoft Hong Sodoma 9 MWM Acoustics
41、Glenn Hess 9 9 Nortel Networks Steve Graham 9 PictureTel Corporation Dave Lindbergh 9 Plantronics Steve Graham 9 Plantronics Bill Rains - 9 Polycom Peter Baker 9 Texas Instruments Tom Harley 9 Uniden Al Baum 9 Vtech Steve Whitesell 9 TIA-920.130-A v Copyrighted parts of ITU-T Appendix I to Recommend
42、ation G.113 and Recommendation P.79 are used with permission of the ITU. The ITU owns the copyright for the ITU Recommendations. Copyrighted parts of ISO 3 are used with permission of the ISO. The ISO owns the copyright for the ISO Standards. Suggestions for improvement of this standard are welcome.
43、 They should be sent to: Telecommunications Industry Association Engineering Department Suite 300 250 Wilson Boulevard Arlington, VA 22201 ( http:/www.tiaonline.org ) TIA-920.130-A vi Introduction This revision of TIA-920 establishes headset telephone audio performance requirements for wideband digi
44、tal wireline telephones regardless of protocol or digital format. Significant improvements and corrections have been made, particularly related to the use of improved ear simulators. This standard addresses wideband performance, where wideband is nominally defined as the frequency range between 150
45、and 6800 Hz. Requirements for conventional narrowband telephony, in the frequency range between 300 and 3400 Hz are defined in ANSI/TIA-810-B. TIA-920.130-A 1 Telephone Terminal Equipment Transmission Requirements for Wideband Digital Wireline Telephones with Headsets 1. Scope This standard establis
46、hes transmission performance requirements for headset devices that function as a wideband digital wireline telephone. Transmission may be over any digital interface including Local or Wide Area Networks, Firewire/IEEE Std 1394, Universal Serial Bus (USB), public ISDN or digital over twisted pair wir
47、e. This includes TDM-based and packet-based (e.g. VoIP) telephones. These telephones may be connected through modems, voice gateways, wireless access points, or PBXs, or they may be personal computer-based telephones. Examples include, but are not limited to: ISDN telephones, digital proprietary tel
48、ephones, VoIP telephones (corded and cordless), softphones running on personal computers, IEEE Std 802.11 telephones, USB telephony devices, DECT (CAT-iq) telephones, Bluetoothtelephony devices, and HD (High Definition) voice telephony devices. Some telephone systems consist of a host (such as a lap
49、top computer) with an interface for a Universal Serial Bus (USB) or Bluetooth device. If the host device is assumed to have a 0 dB loss plan in its default state, then the relevant clauses of this standard are directly applicable to the USB or Bluetooth device. If the host system provides gain or loss in the send path, receive path, or both, then the relevant clauses of this standard apply to the composite system. The test measurement methods in this stan
