TIS 1642-1998 Cast steel shot and grit for peening and cleaning《锤击和清洗用铸钢丸和粗砂》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSB-M2D402-A3-2007 POLYURETHANE (PUR) FOAM HIGH RESILIENT TO BE USED WITH FORD WSS-M99P1111-A 《高弹性聚氨酯(PUR)泡沫 与标准FORD WSS-M99P1111-A一起使用 [使用 FORD WSS-M15P20-B1 FORD WSS-M15.pdf

FORD WSB-M2D409-A-2006 POLYURETHANE (PUR) FOAM ACOUSTICAL 64 KG M3 TO BE USED WITH FORD WSS-M99P1111-A 《64 KG M3声学用聚氨酯（PUR）泡沫 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSB-M2D452-A-2010 THERMOPLASTIC ELASTOMER (TEEE) MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用热塑性弹性体（TEEE）成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSB-M2D452-A2-2004 THERMOPLASTIC ELASTOMER (TEEE) MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSB-M2D452-A)《汽车内部用热塑性弹性体(TEEE)成型料 与标准FORD WSS-M99.pdf

FORD WSB-M2D456-A-2009 POLYURETHANE (PUR) FOAM CAST TO BE USED WITH FORD WSS-M99P1111-A 《聚氨酯（PUR）泡沫铸件 与标准FORD WSS-M99P1111-A一起使用 ［使用 FORD WSS-M99P32-C］》.pdf

FORD WSB-M2D462-A1-2010 THERMOPLASTIC ELASTOMER CHLORINATED ETHYLENE [TE(PE-C)] 60 A HARDNESS EXTERIOR ONLY TO BE USED WITH FORD WSS-M99P1111-A 《仅外部硬度为60A的含氟乙烯[TE(PE-C)]热塑性弹性体 与.pdf

FORD WSB-M2D462-A2-2010 THERMOPLASTIC ELASTOMER CHLORINATED ETHYLENE [TE(PE-C)] 70 A HARDNESS EXTERIOR ONLY TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSB-M2D462-A1)《仅外部硬.pdf

FORD WSB-M2D462-A3-2010 THERMOPLASTIC ELASTOMER CHLORINATED ETHYLENE [TE(PE-C)] 80 A HARDNESS TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSB-M2D462-A1)《仅外部硬度为80A的含氟乙烯[TE(.pdf

FORD WSB-M2D467-A-2009 THERMOPLASTIC POLYOLEFIN (TPO) MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用热塑性聚烯烃（TPO）成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf