TIS 2098-2001 Determination of water karl fischer method (general method)《水的测定 卡尔费希尔法(一般方法)》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 2510-3-1971 Bolted Connections with Reduced Shank Stud-bolts《带缩径杆的螺栓连接件 双头螺柱》.pdf

DIN 2510-4-1971 Bolted Connections with Reduced Shank Studs《带缩径杆的螺栓连接件 螺柱》.pdf

DIN 2510-5-1971 Bolted Connections with Reduced Shank Hexagon Nuts《带缩径杆的螺栓连接件 六角螺母》.pdf

DIN 2510-6-2013 Bolted connections with waisted shank - Part 6 Cap nuts《带有不脱出螺钉的螺栓连接件 第6部分 盖型螺母》.pdf

DIN 2510-7-1971 Bolted Connections with Reduced Shank Extension Sleeves《带减缩刀柄的螺栓连接件 第7部分 延伸式套管》.pdf

DIN 2510-8-1971 Bolted Connections with Reduced Shank Threaded Holes for Studs《带缩径杆的螺栓连接件 螺杆用的螺纹孔》.pdf

DIN 25108-1978 Suburban railways interface and outline dimensions for magnetic track brakes《郊区铁路 电磁轨道制动系统的连接尺寸和外形尺寸》.pdf

DIN 25112-1-1980 Suburban railway vehicles profiles for wheel flange of tyres width 95 and 110 mm《郊区铁路车辆 第1部分 宽度为 95 mm 和 110 mm 的轮胎轮缘截面》.pdf

DIN 25112-2-1983 Suburban railway vehicles profiles for wheel flange of tyres profile B width 95 and 115 mm《短途轨道车辆 轮箍的轮缘 截面B、宽95mm和115mm》.pdf