TIS 938-1990 Standard for roll-on pilferproof closures《套式防窃罩标准》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 65452-1988 Aerospace spotlights with 100 mm 134 mm and 200 mm effective diameter technical specification《航空航天 有效直径为100mm，134mm和 200mm聚光灯 技术规范》.pdf

DIN 65453-1993 Aerospace preimpregnated unidirectional sheet of carbon fibres and bismaleinimide- or polyimide resin technical specification《航空航天 碳纤维和双马来酰亚胺树脂或聚酰亚胺树脂制的预浸渍不定向薄板材》.pdf

DIN 65454-1988 Aerospace hinges extruded in aluminium and corrosion-restisting steel half-hinges and hinges in manufacturing lengths light series《航空航天 铝和耐蚀钢挤压成型的合页 生产长度的半边合页和合页 轻型系.pdf

DIN 65456-1987 Aerospace washers for flight control rods with hole for bonding《航空航天 飞行控制杆用的带粘接孔的垫圈》.pdf

DIN 65457-1987 Aerospace thimbles formed from steel dimensions masses《航空航天 钢制套环 尺寸 质量》.pdf

DIN 65460-1988 Aerospace acid pickling of aluminium and aluminium alloys also for resistance welding code number 0100《航空航天 铝和铝合金的酸浸洗 也适用于电阻焊 代号0100》.pdf

DIN 65461-2011 Aerospace - Studs with MJ thread captive ring lock steel nominal tensile strength 1 100 MPa for temperature up to 235 C《航空航天 温度高至235℃标称抗拉强度1 100 MPa的带有MJ螺纹 捕捉环锁的钢制双头.pdf

DIN 65462-2011 Aerospace - Studs with MJ thread captive ring lock corrosion-resisting steel tensile strength 1 100 MPa for temperature up to 315 C《航空航天 温度高至315℃抗张强度1 100 MPa的带有捕捉环锁.pdf

DIN 65463-2011 Aerospace - Studs with MJ thread captive ring lock titanium alloy tensile strength 1 100 MPa for temperatures up to 315 C《航空航天 温度高至315℃抗张强度1100 MPa钛合金捕捉环锁MJ螺纹双头螺柱 n》.pdf