TS 2306-1976 Sintered Metal Bushes - Determination Of Radiol CrnshingStrength《烧结金属衬套 径向压溃强度测定法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 20925-1975 Units of changeable press-moulds with lowpositioned loading chamber for moulding thermoset articles Construction and dimensions《热固制品压制用下部带装料箱的压模可换组件 结构及尺寸》.pdf

GOST 20926-1975 Unit for changeable compression moulding thermoset articles press-moulds Construction and dimensions《热固制品直接压制用压模可换组件 结构及尺寸》.pdf

GOST 20927-1975 Inserts to the unit for changeable compression moulding press-moulds Construction and dimensions《直接压制可换压模组件衬垫 结构及尺寸》.pdf

GOST 20928-1975 Shank of the unit for changeable compression moulding press-moulds Construction and dimensions《直接压制可换压模用模体尾柄 结构及尺寸》.pdf

GOST 20929-1975 Plates-blanks of changeable press-moulds for moulding thermoset articles Construction and dimensions《热固制品压制用可换压模坯料板 结构及尺寸》.pdf

GOST 20930-1975 Spreaders Construction and dimensions《截断器 结构及尺寸》.pdf

GOST 20931-1975 Restrictive bushes Construction and dimensions《限制器 结构及尺寸》.pdf

GOST 20932-1975 Loading moulding for loose press-moulds Construction and dimensions《可拆卸压模压制箱 结构及尺寸》.pdf

GOST 20933-1975 Handles for loose press-moulds Construction and dimensions《可拆卸压模手柄 结构及尺寸》.pdf