TS 2411-1976 RUBBER HOSES FOR VVELDING AND CUTTING GASES《焊接和切割气体用橡胶软管》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SAE AS 9847A-2004 PIN STRAIGHT HEADED 3749 DIAMETER UNS S41800《直柄、有头、直径为0 3749的销钉 UNS S41800》.pdf

SAE AS 9848A-2004 PIN STRAIGHT HEADED 49999 DIAMETER UNS S41800《直柄、有头、直径为0 4999的销钉 UNS S41800》.pdf

SAE AS 9880-1999 WASHER CUP LOCK C CRES AMS5510《杯形锁紧垫圈 耐腐蚀钢AMS 5510 FSC 5310》.pdf

SAE AS 9885A-2005 BOLT MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD PD SHANK CORROSION AND HEAT RESISTANT STEEL UNS S41800 140 KSI MIN 1900-32 UNJF-3A《 1900-32 UNJF-3A、最小140 ksi、U.pdf

SAE AS 9887A-2012 BOLT MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD PD SHANK AMS5616 3125-24 UNJF-3A《机械式双六角形扩展垫圈头 PD柄AMS 5616 3125-24 UNJF-3A螺栓》.pdf

SAE AS 9894A-2015 Bolt Machine-Double Hexagon Extended Washer Head Drilled AMS 5616 190-32 UNJF-3A.pdf

SAE AS 9895A-2007 BOLT MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD DRILLED AMS 5616 2500-28 UNJF-3A《AMS 5616 2500-28 UNJF-3A钻孔双六角延展带垫圈头的机器螺栓》.pdf

SAE AS 9895B-2017 BOLT MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD PD SHANK DRILLED CORROSION RESISANT STEEL (UNS S41800) 2500-28 UNJF-3A.pdf

SAE AS 9902D-2010 PLUG MACHINE THREAD DRILLED PREFORMED PACKING AS8879 THREAD (UNS S34700)《预制包装AS8879螺纹 机器螺纹钻孔的插头(UNS S34700)》.pdf