TS 2597-1977 METHODS OF MEASUREMENT FOR RADIO EQUIPMENT USED N THE MOB LE SERVICES PART 1 GENERAL DEFINITIONS AND STANDARD CONDITIONS 01 MEASUREMENT《移动设备使用的无线电设备的测量方法 第1部分：一般定义和标准测.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSA-M2D401-A8-2004 FLUOROELASTOMER (FKM) OXYGENATED OXIDIZED FUEL RESISTANT TO BE USED WITH FORD WSS-M99P1111-A 《耐充氧 氧化燃料的氟橡胶（FKM） 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSA-M2D451-A2-2008 HYDROGENATED NITRILE (HNBR) RUBBER TO BE USED WITH FORD WSS-M99P1111-A 《氢化丁腈橡胶(与WSS-M99P1111-A号福特材料一起使用)(用于WSS-M2D451-B号福特材料)》.pdf

FORD WSA-M2F182-A-2014 FABRIC VINYL COATED (PVC) MULTI-PURPOSE TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSA-M2P170-A1-2005 PAINT PERFORMANCE CORROSION HEAT RESISTANT COATING 150 max TO BE USED WITH FORD WSS-M99P1111-A 《最高工作温度150℃的耐腐蚀 耐高温油漆的性能 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSA-M2P170-A2-2005 PAINT PERFORMANCE CORROSION HEAT RESISTANT COATING 450 MAX TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSA-M2P170-A1 Supersedes ESEN-M91J8-B ESE-M99J1-A.pdf

FORD WSA-M2P170-A3-2009 PAINT PERFORMANCE CORROSION HEAT RESISTANT COATING 650 DEGREE C max TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSA-M2P170-A1)《最高耐受温度650℃的耐腐蚀 耐高温油漆.pdf

FORD WSA-M3D164-A-2004 UNSATURATED POLYESTER (UP) MODIFIED 50% GLASS FIBER REINFORCED SHEET MOLDING COMPOUND (SMC) TO BE USED WITH FORD WSS-M99P1111-A 《50%玻璃纤维增强的不饱和聚酯(UP)片状成型料 .pdf

FORD WSA-M3D173-A3-2005 VINYL ESTER (VE) MODIFIED 35% GLASS FIBER REINFORCED SHEET MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《35%玻璃纤维增强的乙烯基酯(VE)改性片状成型料 与标准FORD WSS-M9.pdf

FORD WSA-M4D688-A1-2008 ABS + POLYCARBONATE BLEND (ABS+PC) IMPACT MODIFIED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《冲击改性丙烯腈-丁二烯-苯乙烯+聚碳酸酯(ABS+PC)共混物模塑( 和FORD WSS-M99P.pdf